Table of Contents
Advertisement
Answering system settings
Message alert tone
When the answering system is turned on, the telephone base beeps every
10 seconds to alert you of new messages. The tone stops when all new
messages have been reviewed.
To change the setting:
Using the telephone base:
1.
Press the MENU softkey when the telephone base is not in use.
Press the SELECT softkey to select Answering sys.
2.
/
3.
Press
or
CID
then press the SELECT softkey. The corresponding
icon,
or
1
/
.
Press
or
CID
press the SELECT softkey.
/
5.
Press
or
CID
press the SELECT softkey.
/
6.
Press
or
CID
the SET softkey to confirm your setting or press
CANCEL to exit to the previous menu without making
any changes.
Using the handset:
1.
Press the MENU softkey when the handset is not in use.
Press the SELECT softkey to select ANSWERING SYS.
2.
3.
Press
or
press the SELECT softkey. The corresponding icon,
1
or
, flashes on the screen.
2
.
Press
or
SELECT softkey.
5.
Press
or
SELECT softkey.
6.
Press
or
SET softkey to confirm your setting or press the
BACK softkey to exit to the previous menu without
making any changes.
The answering system must be turned on for the message alert tone
to function.
/
to select Mailbox 1 or Mailbox 2,
DIR
flashes on the screen.
2,
/
to select Ans sys setup, then
DIR
/
to select Msg alert tone, then
DIR
/
to select On or Off, then press
DIR
to select Mailbox 1 or Mailbox 2, then
to select Ans sys setup, then press the
to select Msg alert tone, then press the
to select On or Off, then press the
29
1
# of rings
Remote code
Msg alert tone
SELECT
1
MSG ALERT TONE
On
Off
SET
1
ANS SYS SETUP
#
of rings
Remote code
Msg alert tone
BACK
SELECT
1
MSG ALERT TONE
On
Off
BACK
SET
Advertisement
Table of Contents
