Headset Operation; Headset Jack - VTech mi6879 User Manual

Headset operation

Headset jack

You can use this telephone handsfree
when you install any VTech 2 5 mm
headset, purchased separately
Plug the headset into the jack located
on the left side of the handset (under
the small rubber flap). Do not force the
connection, but ensure the plug fits
securely
Operating range
T h i s c o r d l e s s t e l e p h o n e o p e r a t e s w i t h i n
the maximum power allowed by the Federal
Communications Commission (FCC) Even so, this
handset and telephone base can communicate
only over a certain distance - which can vary with
the locations of the telephone base and handset,
the weather, and the construction of your home or
office.
If there is a call while the handset is out of range,
the handset might not ring or if it does ring, the call
might not connect well when you press
closer to the telephone base, then press
answer the call
If the handset is moved out of range during a
telephone conversation, you might hear noise or
interference To improve reception, move closer to
the telephone base
If you move out of range without pressing OFF,
the telephone will be left off the hook To hang up
properly, walk back into range, periodically pressing
OFF.
www.vtechphones.com
• To purchase a
headset, visit us on
the web at www
vtechphones com
or call VTech
Customer Service at
 (800) 595-95 In
Canada, contact
Telecommunications
Canada Ltd at www
. Move
vtechcanada com or
to
 (800) 267-7377
45