Set Remote Access Code; Remote Operation - VTech mi6879 User Manual

Vtech mi6879: user guide

Hide thumbs Also See for mi6879:

Table of Contents

Answering system operation

Set remote access code

Press SETUP twice, and the system will announce "Remote access code. To change the setting, press

CHANGE."

2 Because the remote access code was set to 9 at the factory, press CHANGE, and the system

announces "19."

3 Press and release CHANGE to advance the remote access code number by one Press and hold

CHANGE to advance the remote access code by 0

4 When the desired number is heard Press SETUP to save and advance to the next menu

option, or press PLAY/STOP

From any touch tone telephone, dial your telephone number

2 While the outgoing announcement is playing, enter the two-digit remote access code before taking

the following actions

3 Hang up to end the call and save all undeleted messages

If you pause for more than 0 seconds during remote access, you will hear a help menu listing all

features and commands If no command is entered for the following 20 seconds, the call will end

automatically

to save and exit

www.vtechphones.com

Table of Contents