Setup And Installation; For Your Safety; Temperature And Humidity; Installation Location - Trotec SpeedMarker 700 FL Operating Manual

Setup and installation

8 Setup and installation
8.1

For your safety

Notice
The setup has to be carried out by Technical Support.
8.2

Temperature and humidity

Ambiente conditions
Operating temperature (ambiente temperature):
Relative humidity:
If the system has been exposed to large temperature fluctuations, it must first be brought back to room temperature
•
before commissioning.
ENVIRONMENTAL CONDITIONS
Provide sufficient illumination at the workplace.
•
Ensure a dust-free environment (II° according to IEC60947-1).
•
Shielding from EMC.
•
Freedom of interfering electrical installations, hoses and pipe lines.
•
Power supply free of fluctuations.
•
8.3

Installation location

INSTALLATION LOCATION
The installation location must:
Have a stable power supply.
•
Be vibration free.
•
Have sufficient air supply for the laser rack and PC.
•
38
+15 °C to +25 °C (59 °F to 77 °F)
45% to 65%, non-condensing