Table of Contents
Advertisement
Calibration parameters
2.13 Calibration parameters
2.13.1 Meter (frequency meter) calibration (C1
The AM terminal is factory-set to provide 5VDC output in the full-scale status of
each monitor item. However, calibration parameter C1 can be used to adjust the
output voltage ratio (gain) according to the meter scale. Note that the maximum
output voltage is 5VDC.
Parameter
Name
AM terminal
C1 (901)
calibration
The parameter number in parentheses is the one for use with the parameter unit (FR-
PU04).
Factory Setting Setting Range
124
)
Remarks
Setting is enabled when
Pr. 30 = "1"
Advertisement
Table of Contents
