Table of Contents
Advertisement
OPERATING INSTRUCTIONS
1
2
3
-
4
5
6
Switch ON the electricity supply
at the isolating switch.
Check that the power on indicator
in the centre of the start/stop button
is illuminated with a green light.
Start the shower by pressing
the Start/Stop button
After a few seconds the water will
start to flow from the shower head.
Adjust the Temperature Control
to your preference
+
Rotating the control clockwise will
make the water hotter, rotating the
control anti-clockwise will make
the water cooler.
HOT
Check the temperature of the
COLD
water before showering
Stop the shower by pressing the
Start/Stop button
Water will continue to flow for a few
seconds, purging any remaining hot
water from the shower.
Switch OFF the electricity supply
at the isolating switch.
DO NOT isolate the electricity
supply until water has stopped
flowing.
23
Advertisement
Table of Contents
