User Operating Instructions & Functions - Triton T80sr PUMPED Manual

OPERATING THE SHOWER
Operating the shower
WARNING!
Before normal operation of
W-001-A
the shower, it is essential the
commissioning procedure has
been completed correctly.
To Start the Shower
Pressing the START/STOP button switches on
the pump allowing water to immediately flow
through the unit.
To Stop the Shower
Press the START/STOP button. This switches off
the pump and the water flow will cease.
WARNING!
If restarting immediately after
W-003-A
stopping, be aware that a slug of
hot water will be expelled for the
rst few seconds.
Power Selector
The power selector has four settings — COLD,
LOW, MEDIUM and FULL POWER (fig.23).
The blue symbol is for COLD water only.
Adjusting the temperature control at this setting
will only increase or decrease the force of the
water from the shower head, it will not alter the
water temperature.
The red outline symbol is the LOW setting for
extra economy during hot months. Temperature
adjustment at this setting is via the temperature
control.
The single red symbol is the MEDIUM setting
for economy during warmer months and any
temperature adjustment at this setting is via the
temperature control.
The double red symbol is FULL power setting
which allows the highest flow achievable for your
preferred temperature. Temperature adjustment
at this setting is via the temperature control.
T80sr pumped
NOTE: In normal use, the water supply to
the shower unit can be left permanently
on, but as with most electrical appliances,
the unit must be switched off at the
isolating switch when not in use.
18
Fig.23
Power on
indicator