SPECIFICATION
Nominal Power Rating at 230V
Nominal Power Rating at 240V
Supply Fuse/Miniature Circuit Breaker
(MCB)
Residual Current Device (RCD)
Isolation Switch
Supply Cable
Supply Source
Minimum Dynamic Pressure and flow to
the inlet of the shower
Maximum Static Pressure
Maximum inlet temperature
Minimum inlet temperature
Inlet connection
Outlet connection
ABS
Minerally insulated corrosion resistant
metal sheathing
ELECTRICAL
8.0kW
8.7kW
8.7kW - 40Amps
9.8kW - 45Amps
30mA
45Amp Double Pole Isolating Switch, with 3mm
Minimum Contact Gap
Maximum is 16mm, Refer to Electrical Requirements
section
PLUMBING (see page 10 for plumbing requirements)
Mains pressure cold water only
100kPa (1.0 bar) at 8 litres per minute
1000 kPa (10 bar)
28°C (20°C BEAB Care)
2°C (5°C BEAB Care)
½" BSP male thread for 15mm compression fitting
½" BSP male thread
MATERIALS
Backplate, cover, controls, shower head
Elements
ACCREDITATIONS
50kPa (0.5 bar) at 8 litres per minute under adnormal conditions
7
9.0kW
9.8kW
IP25
TM
KM 52019
BS EN 60335-2-35