MAINTENANCE
Instructions for installers and service engineers only
INSTRUCTIONS FOR INSTALLERS AND SERVICE ENGINEERS ONLY
Instructions for installers and service engineers only
Cleaning the Filter
It is recommended that the filter is periodically cleaned in order to maintain the
performance of the shower. It is essential that this operation is carried out by a competent
person.
Switch off the electricity and water supply at the mains.
The inlet filter is situated inside the water inlet fitting.
To gain access to the filter remove the cover and splashguard. Unscrew the inlet filter cap
on the water inlet fitting.
Inspect the O-ring for damage when the filter is removed. Do not over tighten the filter
cap on reassembly.
When cleaning the filter, DO NOT use a sharp object as it will cause damage. It is
preferable to use an old toothbrush or similar.
Filter
O-ring
Inlet filter
cap
26