Plumbing; Fixing To The Wall - Triton OMNICARE ULTRA CINCULT09W Manual

INSTALLATION
Step Step
4
- Temporarily connect the shower to plumbing
pipework.
- Using the backplate as a template (making sure it
is level), mark the fixing holes. Use any 2 holes at
the top and any 2 holes at the bottom to secure
the shower.
- Remove the shower from the wall.
- Drill the fixing holes.
- Use appropriate wall plugs.
- Reconnect the shower to plumbing pipework
and secure the shower to the wall using
appropriate screws.
IMPORTANT: Ensure the shower is securely fixed
to the wall. DO NOT use adhesives as a method of
securing the appliance to the wall.
Step Step
5
- Ensure that all pipe connecting fittings
are tight. DO NOT overtighten.
- Turn on mains water supply and check
the pipework for any water leakage.
IMPORTANT: Use a suitable sealant to seal
around the rear entry pipework to prevent
water entering the wall.
15
