Fitting The Cover - Triton OMNICARE ULTRA CINCULT09W Manual

INSTALLATION
Step Step
16
Connect the 6-way cable from the cover
to the socket on the power PCB cable.
Note: The cable connector can only be
fitted to the socket one way.
Guide the cover into position so that the
temperature selector locates correctly
onto the valve (minor adjustment of the
temperature dial may be necessary to
align with the valve). Apply slight pressure
to the cover and secure in position with
the 4 retaining screws.
Depending on pipe and cable entry
positions, click either or both the top and
bottom trims into position.
Turn the electric supply back on at the
isolating switch. The power indicator will
light. No water will flow now until the
start/stop button is pressed.
22
Step Step
17
Step Step
18