Preparation For Use - Siemens SIMOTICS T-1FW6 Configuration Manual

Preparation for use

Risk of death and crushing as a result of permanent magnet fields
Severe injury and material damage can result if you do not take into consideration the safety
instructions relating to permanent magnet fields.
• Observe the information in Chapter "Danger from strong magnetic fields (Page 34)".
The rotor is secured in the stator by means of transport locks, and is protected by spacer film. The
original packaging for the built-in torque motor and the transport locks (incl. the screws) are
required for storage/transport purposes and should, therefore, be kept in a safe place.
Risk of toppling over
Motors, stators, and rotors must not be stacked too high – risk of death, personal injury and/or
material damage.
• Never stack packed or unpacked motors, stators or rotors on top of one another.
• Only transport and store motors, stators and rotors in the horizontal position.
• Observe the safety instructions and handling on the packaging.
1FW6 Built-in torque motors
Configuration Manual, 09/2022, A5E52220645B AA
WARNING
WARNING
8
419