Preparation For Use; Transporting - Siemens SIMOTICS S-1FT7 Configuration Manual

Preparation for use

7.1

Transporting

Note
Comply with the local national regulations for the transportation of motors.
Note
Observe the information on the original packaging when transporting and setting down the
motor.
Transporting the motor
● Transport the motor in its original packaging.
● Use suitable load suspension devices when transporting the motor.
● Transport the motor carefully.
Environmental conditions for transporting the motor in the transport packaging according to
Class 2K3 to EN 60721-3-2 - with the exception of environmental influencing quantities "Air
temperature" and "Condensation"
Climatic ambient conditions
Highest relative humidity
Mechanical ambient conditions
Protection against chemical substances
Biological ambient conditions
Setting down the motor
1. Set the motor down on a hard, level surface.
2. Secure the motor against unintentional movements.
S-1FT7 synchronous motors
Configuration Manual, 09/2018, A5E45099423B AA
- 15 °C ... + 70 °C,
< 95 % at 40 °C, condensation not permissi-
ble
Shock and vibration permissible according to
3M8 to EN 60721-3-3: Individual shocks (6
ms) max. 250 m/s²
Protected in acc. with Class 2C2
Suitable in acc. with Class 2B2
7
361