Mechanical properties
4.1 Cooling
Materials used in the cooling circuits of torque motors
Table 4-1
Materials in the cooling circuits of torque motors (not including the material used for the connections)
Cooling jacket
1FW6090, 1FW6130:
•
EN AW-5083
(EN 573-3)
•
Viton® (FPM) gasket
1FW615x
*)
:
•
S355J2G3
(EN 10025)
•
Viton® (FPM) gasket
Applicable for the corresponding frame size, also for 1FW6 High Speed built-in torque motors
*)
NOTICE
Corrosion as a result of unsuitable materials used to connect the cooler
Corrosion damage can occur if you use unsuitable materials to connect to the cooler.
• We recommend that you use brass or stainless steel fittings when connecting the cooler.
Calculating the thermal power that can be dissipated by the cooler
Average density of the coolant:
Average specific heat capacity of the coolant:
Temperature deviation vis-à-vis the intake temperature:
Volume flow:
60
Integrated cooling
(main cooler)
1FW6050, 1FW6060:
•
X10CrNiS18-9
(DIN 17440)
•
SF-Cu
(DIN 17671)
•
Viton® (FPM) gasket
1FW6160, 1FW619x
,
*)
1FW623x
, 1FW6290:
*)
•
X6CrNiTi18-10
(EN 10088)
•
SF-Cu
(DIN 17671)
•
CW617N
(DIN EN 12449 /
DIN EN 12167)
•
Viton® (FPM) gasket
•
Ag 102
(EN 1045) +
welding flux EN 1045-
FH10
Integrated cooling
(precision cooler)
1FW6160, 1FW619x
,
*)
1FW623x
, 1FW6290:
*)
•
X6CrNiTi18-10
(EN 10088)
•
SF-Cu
(DIN 17671)
•
CW617N
(DIN EN 12449)
•
Viton® (FPM) gasket
ρ
c
ΔT
Configuration Manual, 09/2022, A5E52220645B AA
Cooling connection adapter
1FW6160, 1FW619x
*)
1FW623x
, 1FW6290:
*)
•
CW617N
(DIN EN 12449 /
DIN EN 12167)
•
Viton® (FPM) gasket
in kg/m
3
in J/(kg K)
p
in K
in m
/s
3
1FW6 Built-in torque motors
,