Procedure For Installing The Motor - Siemens SIMOTICS T-1FW6 Configuration Manual
Built-in torque motors
Hide thumbs
Also See for SIMOTICS T-1FW6:
- Configuration manual (560 pages) ,
- Operating instructions manual (138 pages) ,
- Configuration manual (300 pages)
Table of Contents
Advertisement
Configuration
6.4 Installation
6.4.7
Procedure for installing the motor
Sequence for installing the motor
Risk of injury and material damage
Injury and/or destruction of motor components can occur if you do not observe the specified
sequence when installing the motor.
• Perform work steps in the specified sequence during installation.
Risk of electric shock
Every movement of the rotor relative to the stator and vice versa induces a voltage at the stator
power connections. There is a risk of electric shock if you touch the power connections.
Furthermore, in case of a phase short-circuit, short-circuit braking torques which prevent free
rotation of the rotor can be generated.
• Insulate the open power connections properly.
Danger of crushing
If you join the stator and rotor as individual components manually, there is a risk of crushing.
• Use a special joining device for centering and installing. Follow the description of the joining
126
WARNING
WARNING
WARNING
fixture.
1FW6 Built-in torque motors
Configuration Manual, 09/2022, A5E52220645B AA
Advertisement
Table of Contents
