Preparation For Use - Siemens SIMOTICS T-1FW6 Operating Instructions Manual

Built-in torque motors
Hide thumbs Also See for SIMOTICS T-1FW6:
Table of Contents

Advertisement

Preparation for use

Risk of death and crushing as a result of permanent magnet fields
Severe injury and material damage can result if you do not take into consideration the safety
instructions relating to permanent magnet fields.
• Refer to Chapter "Danger from strong magnetic fields (Page 28)".
Keep these operating instructions so that they are accessible at all times. Please provide these
operating instructions to the appropriate personnel.
Incorrect packaging, storage and/or incorrect transport
Risk of death, injury and/or material damage can occur if the devices are packed, stored, or
transported incorrectly.
• Always follow the safety instructions for storage and transport.
• Before transporting or lifting machines or parts machines, lock the rotary axes so the they
• Always correctly and carefully carry out storage, transport and lifting operations.
• Only use suitable devices and equipment that are in perfect condition.
• Only use lifting devices, transport equipment and suspension equipment that comply with
• IATA regulations must be observed when components are transported by air.
• Mark locations where rotors are stored with warning and prohibition signs according to the
• Observe the warning instructions on the packaging.
• Always wear safety shoes and safety gloves.
• Take into account the maximum loads that personnel can lift and carry. The motors and their
• Torque motors and rotors must always be transported and stored in the packaged condition.
1FW6 built-in torque motors
Operating Instructions, 09/2022, A5E52220812B AA
WARNING
WARNING
cannot accidentally rotate. This is necessary, as the axes are not self locking.
the appropriate regulations.
tables in the Chapter "Supplied pictograms"
components can weigh more than 13 kg.
– Replace any defective packaging. Correct packaging offers protection against sudden
forces of attraction that can occur in their immediate vicinity. Further, when correctly
packaged you are protected against hazardous motion when storing and moving rotors.
– Only use undamaged original packaging.
4
59

Advertisement

Table of Contents
loading

Table of Contents