ACT Profile 50 RGBAL
Changing the Gobo
The ACT Profile 50 RGBAL is delivered with a gobo holder and a set of 5 metal gobos. To replace the
gobo, follow the steps below:
Remove the retaining ring from the gobo holder (12) with needle-nose pliers or a similar sharp tool.
Change the metal gobo. Make sure that the painted (black) side of the gobo is facing upwards as
shown on Fig. 22. When inserted back into the gobo slot, the painted (black) side should be facing
the lens (07).
Note:
Make sure that painted (black) side of the gobo is facing the lens.
Replace the retaining ring and secure it into position.
Product code: 34033
Fig. 22
18
Fig. 23