Related Manuals for SHOWTEC 34014
Summary of Contents for SHOWTEC 34014
- Page 1 USER MANUAL ENGLISH ACT Fresnel 50 RGBAL incl. barndoor Product code: 34014 Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands...
- Page 2 ACT Fresnel 50 RGBAL incl. barndoor Preface Thank you for purchasing this Showtec product. The purpose of this user manual is to provide instructions for the correct and safe use of this product. Keep the user manual for future reference as it is an integral part of the product. The user manual shall be stored at an easily accessible location.
-
Page 3: Table Of Contents
Main Menu Options ............................24 DMX Functions............................24 DMX Address ............................24 DMX Channel Mode ..........................25 DMX Fail ..............................25 View DMX Value ..........................25 Show Settings............................26 Function Mode ...........................26 Show Chase ............................26 Show Speed ............................26 Static Color ..............................27 Fixture Settings ............................27 Product code: 34014... - Page 4 Preventive Maintenance ..........................34 Basic Cleaning Instructions ........................34 Corrective Maintenance ..........................35 Replacing the Fuse ..........................35 Deinstallation, Transportation and Storage ....................36 Instructions for Transportation ........................36 Instructions for Deinstallation ..........................36 Storage ................................36 10. Disposal ................................36 11. Approval ................................36 Product code: 34014...
-
Page 5: Introduction
The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual. After unpacking, check the contents of the box. If any parts are missing or damaged, contact your Highlite International dealer. Your shipment includes: ● Showtec ACT Fresnel 50 RGBAL ● Barndoor ● Color frame ●... -
Page 6: Symbols And Signal Words
This product is provided with an information label. The information label is located on the mounting bracket of the device. The information label contains the following symbols: This device is designed for indoor use. This device falls under IEC protection class I. This device shall not be treated as household waste. Product code: 34014... -
Page 7: Safety
Do not immerse the device in water or other liquids. Do not install the device in a location where flooding may occur. ● Do not use the device during thunderstorms. Disconnect the device from the electrical power supply immediately. Product code: 34014... - Page 8 This device is not suitable for households and for general lighting. ● This device is not designed for permanent operation. ● This device does not contain user-serviceable parts. Unauthorized modifications to the device will render the warranty void. Such modifications may result in injuries and material damage. Product code: 34014...
-
Page 9: Requirements For The User
Ordinary persons are all persons other than instructed persons and skilled persons. Ordinary persons include not only users of the product but also any other persons that may have access to the device or who may be in the vicinity of the device. Product code: 34014... -
Page 10: Description Of The Device
Description of the Device The Showtec ACT Fresnel 50 RGBAL is a compact 50-watt RGBAL COB LED Spot with high CRI (>93) and silent operation. It projects a bright, soft beam of light within a wide, manually adjustable zoom range of 15°-35°. -
Page 11: Back View
Power Pro connector OUT 100–240 V, 50/60 Hz (Gray) Power-pro connector IN 100–240 V, 50/60 Hz (Blue) 3-pin DMX signal connector IN Manual dimmer / Preset Color control Included Accessories Fig. 04 Fig. 05 Barndoor Color frame Product code: 34014... -
Page 12: Product Specifications
Pin 1 (ground), pin 2 (-), pin 3 (+) Construction: Housing: Aluminum Color: Black IP rating: IP20 Cooling: Forced Convection Thermal: Maximum ambient temperature t 45 °C Minimum ambient temperature t 0 °C Minimum distance: Minimum distance from flammable surfaces: 0,5 m Product code: 34014... -
Page 13: Dimensions
ACT Fresnel 50 RGBAL incl. barndoor Dimensions Fig. 06 Product code: 34014... -
Page 14: Installation
10 times the weight of the device. If possible, the secondary suspension should be attached to a supporting structure independent of the primary suspension. Put the safety cable through the safety eye (02), as shown in Fig. 07. Fig. 07 Product code: 34014... -
Page 15: Angle Adjustment
Turn the zoom control (04) counterclockwise to loosen them. Slide the control forwards or backwards to achieve the desired beam angle (see Fig. 09). After adjusting the beam angle, turn the zoom control (04) clockwise to tighten it. Do not overtighten them. Fig. 09 Product code: 34014... -
Page 16: Barndoor Installation
Put the safety cable through the safety eye of the color frame. Note: Make sure that the color frame is locked in position with the color frame clip before using the device. Fig. 13 Fig. 14 Fig. 15 Product code: 34014... -
Page 17: Connecting To Power Supply
Do not link more devices on one power link than the maximum recommended number. Maximum recommended number of devices: ● at 100–120 V: 15 devices ACT Fresnel 50 RGBAL ● at 200–240 V: 30 devices ACT Fresnel 50 RGBAL Product code: 34014... -
Page 18: Setup
If you use XLR audio cables for DMX data transmission, this may lead to signal degradation and unreliable operation of the DMX network. When you make your own DMX cables, make sure that you connect the pins and wires correctly as shown in Fig. 16. Product code: 34014... -
Page 19: Dmx Linking
Repeat step 2 to connect all devices in a daisy-chain as shown in Fig. 17. Connect a DMX terminator (120 Ω resistor) to the DMX OUT connector of the last device on the data link. Fig. 17 Product code: 34014... -
Page 20: Dmx Addressing
Continue assigning the starting addresses of the remaining devices by adding 12 to the previous number each time. Make sure that you do not have any overlapping channels in order to control each ACT Fresnel 50 RGBAL correctly. If two or more devices are addressed similarly, they will work similarly. Product code: 34014... -
Page 21: Operation
Select the DMX channel mode in the DMX channel mode menu. See 6.6.1.2. DMX Channel Mode on page 25 for more information. See 6.8. DMX Channels on pages 30 for complete overview of all DMX –31 channels. Product code: 34014... -
Page 22: Control Panel
5-channel DMX mode with starting address 001 Note: If no button is pressed, after 20 seconds of inactivity the display will turn off. Press any button to turn the display on. See 6.6.5. Display Settings on page 28 for more information. Product code: 34014... -
Page 23: Menu Overview
ACT Fresnel 50 RGBAL incl. barndoor Menu Overview Product code: 34014... - Page 24 ACT Fresnel 50 RGBAL incl. barndoor Product code: 34014...
-
Page 25: Main Menu Options
In this pop-up submenu you can set the DMX starting address of the device. Press the UP/DOWN buttons to select the starting DMX address of the device. The selection range is between 001 and 512. Press the ENTER button to confirm. Product code: 34014... -
Page 26: Dmx Channel Mode
● in 8- channel DMX mode: red, green, blue, amber, lime, CCT, dimmer and strobe; ● in 12-channel DMX mode: red, green, blue, amber, lime, color macros, CCT, dimmer, dimmer fine, shutter, macro auto and macro speed. Product code: 34014... -
Page 27: Show Settings
Press the ENTER button to confirm. Show Speed In this pop-up submenu menu you can select the speed of the built-in chase. Press the UP/DOWN buttons to set the speed. The adjustment range is 00–99. Press the ENTER button to confirm. Product code: 34014... -
Page 28: Static Color
Halogen (delayed dimming, imitating the behavior of a halogen lamp) ● White Balance: You can adjust the white balance of the LEDs through adjusting the values of the red, green, and blue colors. The adjustment range is 125–255 Press the ENTER button to confirm. Product code: 34014... -
Page 29: Display Settings
02) Press the ENTER button to confirm and open the respective pop-up submenu where you can adjust the values. 03) Press the UP/DOWN buttons to adjust the values. The adjustment range is between 0 and 255. 04) Press the ENTER button to confirm. Product code: 34014... -
Page 30: Fixture Information
● The Manual dimmer / Preset Color control (19) is functional, even if you do not exit the menu and return to the start screen. ● It is not possible to add strobe effect in this mode. Product code: 34014... -
Page 31: Dmx Channels
149–152 Summer Blue 153–156 Steel Green 157–160 Half Shanklin Frost 161–164 Regal Blue 165–168 Special Pale Lavender 169–172 Liberty Green 173–176 Lilac Tint 177–180 Leef Fluorescent 4300K 181–184 No Color Blue 185–188 Terry Red 189–192 Lighter Blue Product code: 34014... - Page 32 Color 1–32 Programs 128–191 Color fade 1–16 192–255 Color change 1–16 Program Speed 000–255 From low to high intensity (0–100 %) Note: Make sure that the shutter (strobe) channel is open in order to use the dimmer. Product code: 34014...
-
Page 33: Rdm Information
RDM Information This device support RDM. Refer to 6.9.2 Supported RDM PIDs (Parameter IDs) for more information. RDM Details ● Responder: 29B4:0D9xxxxx ● Manufacturer’s ID: Showtec (Highlite International B.V.) ● Manufacturer Label: Showtec ● Model Description: ACT Fresnel 50 RGBAL ●... -
Page 34: Troubleshooting
LEDs are damaged your Highlight International dealer No light or LEDs cut The power supply settings do not ● Disconnect the device. Check the out intermittently match local AC voltage and settings and correct, if necessary frequency Product code: 34014... -
Page 35: Maintenance
Attention ● Do not immerse the device in liquid. ● Do not use alcohol or solvents. ● Make sure that the connections are fully dry before connecting the device to the power supply and to other devices. Product code: 34014... -
Page 36: Corrective Maintenance
Insert a new fuse in the fuse holder. Make sure that the type and the rating of the replacement fuse are the same as the ones specified on the information label of the product. Replace the fuse holder in the opening and tighten the fuse cover. Product code: 34014... -
Page 37: Deinstallation, Transportation And Storage
For more detailed information about recycling of this product contact the local authorities or the authorized dealer. Approval Check the respective product page on the website of Highlite International (www.highlite.com) for an available declaration of conformity. Product code: 34014... - Page 38 ACT Fresnel 50 RGBAL incl. barndoor Product code: 34014...
- Page 39 ACT Fresnel 50 RGBAL incl. barndoor Product code: 34014...
- Page 40 ©2023 Showtec...
Need help?
Do you have a question about the 34014 and is the answer not in the manual?
Questions and answers