Gobo Replacement - SHOWTEC ACT Profile 50 RGBAL User Manual

ACT Profile 50 RGBAL

Gobo Replacement

The ACT Profile 50 RGBAL is delivered with a gobo holder and a set of 5 metal gobos. You can order an
additional gobo set of 5 metal gobos with seasonal patterns (order code 34050). To replace the gobo,
follow the steps below:
Loosen the two cover plate thumbscrews (10) (see Fig. 16). Do not remove the thumbscrews.
Slide the gobo slot cover plate (10) towards the lens (07) (see Fig. 17).
Take the gobo holder (12) out the of gobo slot (see Fig. 18).
Change the gobo in the gobo holder (12). See Changing the Gobo on page 18 for more information.
Insert the gobo holder (12) back into the gobo slot (see Fig. 19).
Slide the gobo slot cover plate (11) towards the gobo holder (12) (see Fig. 20).
Tighten the two cover plate thumbscrews (10) to secure the gobo slot cover plate (11) at its place
(see Fig. 21).
Product code: 34033
Fig. 16
Fig. 19
Fig. 17
Fig. 20
17
Fig. 18
Fig. 21