ACT Profile 50 RGBAL
Color Frame Installation
The ACT Profile 50 RGBAL is delivered with a color frame. You can insert a color gel or a diffusion filter into
the color frame. To install the color frame, follow the steps below:
Push the spring-loaded screw (08) and at the same time lift the color frame clip (09) and flip it
backwards (see Fig. 12).
Insert a color gel or a diffusion filter into the color frame (23).
Insert the color frame (23) into the color frame holders (06) (see Fig. 13).
Pull the color frame clip (09) downwards to release the spring-loaded screw (08) (see Fig. 14). The
color frame will be locked in position.
Secure the color frame to the overhead structure with an appropriate secondary attachment, for
example a safety cable. Put the safety cable through the safety eye of the color frame.
Note:
Make sure that the color frame is locked in position with the color frame clip before using the device.
Beam Shaping
You can shape the beam with the 4 framing shutters (03). Move the framing shutters (03) back and forth
to modify the shape of the beam (see Fig. 15).
Product code: 34033
Fig. 12
Fig. 13
16
Fig. 14
Fig. 15