Page 2
For more information: iwant@showtec.info You can get some of the best quality, best priced products on the market from Showtec. So next time, turn to Showtec for more great lighting equipment. Always get the best -- with Showtec ! Thank you!
Page 3
Showtec Showtec LP-416 Product Guide ™ Warning..…...................…………………………………………....Safety-instructions…………………………………………………………………………………….…..... Operating Determinations……………………………………………………………………………...... Description..…................……….……………………………….…....Features…….……………………………………………………………………………………….……..…....Overview………………………………………………………………………………………………………....Controller front..............................Controller backside............................Installation................…...……………………………………..…....Installation............………………………………………..………........Common Terms...........………………………………………..………........Bulgin Connection........………………………………………..………........Analog Out Connection......………………………………………..………........Set Up and Operation..............……..…………………………….…....Maintenance.................………..………….…….……………....Troubleshooting................………………….………………….…....Product Specifications..............……………….…….…………………....
Page 4
If your Showtec device fails to work properly, discontinue use immediately. Pack the unit securely (preferably in the original packing material), and return it to your Showtec dealer for service.
Page 5
Repairs, servicing and electric connection must be carried out only by Showtec. For replacement use fuses of same type and rating only. This device falls under protection class I. Therefore it is essential to connect the yellow/green conductor to earth.
Description of the device Features The LP-416 is a light controller from Showtec and features: • 4 channel chaser with 16A max. load • Background function • 9 built-in programs • 4 modes: Hold dim Hold sound Program sound Program speed •...
Use this output to connect an additional analog dimmer pack (ie. Showtec Dim-master 6, D-pack 6) 17) DMX output Use to connect the LP-416 to DMX power packs. All 4 channels are are available on this output. The dimmer channels are assigned to DMX addresses 001 to 005. Please set the starting address of the connected dimmer pack to 001.
22) Power cable Installation Remove all packing materials from the LP-416. Check that all foam and plastic padding is removed. Screw the equipment into a 19" rack. Connect all cables. Always disconnect from electric mains power supply before cleaning or servicing.
Do not attempt to operate a 120V specification product on 230V power, or vice versa. Maintenance Showtec Showdesigner LP-416 requires almost no maintenance. However, you should keep the unit clean. Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in liquid.
Once the unit operates properly, do not carry out following steps. 1. External dimmer pack does not respond to the LP-416: Check the DMX-address of the external dimmer pack. 6. If the device does not operate properly, unplug the device.