Subscribe to Our Youtube Channel
Related Manuals for SHOWTEC 50787
Summary of Contents for SHOWTEC 50787
- Page 1 MANUAL ENGLISH RDM Splitter Pro 4 Channel DMX V1 Ordercode: 50787 Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands...
-
Page 2: Table Of Contents
Data Cabling ................................8 Maintenance .................................. 9 Replacing the Fuse ..............................9 Troubleshooting ................................9 No Light ..................................9 No Response to DMX ..............................9 Product Specifications ..............................11 Notes ....................................12 Ordercode: 50787... -
Page 3: Warning
Save the carton and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing. Your shipment includes: Showtec RDM Splitter Pro 4 Channel DMX Pro power cable (1,4 m) ... - Page 4 If your Showtec device fails to work properly, discontinue use immediately. Pack the unit securely (preferably in the original packing material), and return it to your Showtec dealer for service....
-
Page 5: Operating Determinations
UK Cable US Cable BROWN YELLOW/COPPER PHASE BLUE BLACK SILVER NEUTRAL YELLOW/GREEN GREEN GREEN PROTECTIVE GROUND Make sure that the device is always properly connected to the earth! Improper installation can cause serious injuries and/or damage of property! Ordercode: 50787... -
Page 6: Return Procedure
After this period complaints will not be handled anymore. Complaints will only then be considered if the client has so far complied with all parts of the agreement, regardless of the agreement of which the obligation is resulting. Ordercode: 50787... -
Page 7: Description Of The Device
Description of the device Features The Showtec RDM Splitter Pro is a universal DMX-512 splitter. All outputs are equipped with separate optical and isolated electronics to ensure that a DMX/RDM signal will be distributed and regenerated in the most optimal quality. All DMX/RDM inputs and outputs support RDM and are equipped with both 3 and 5-pin XLR connectors. -
Page 8: Installation
05) Connect light fixtures to the unit’s DMX "out" sockets. 06) Supply electric power: Plug the unit’s mains power cord into proper electric power supply sockets, starting with the first unit. Do not supply power before the whole system is set up and connected properly. Ordercode: 50787... -
Page 9: Fixture Linking
DAP Audio 110 Ohm cable with digital signal transmission. Ordercode FL0975 (0,75 m), FL09150 (1,5 m), FL093 (3 m), FL096 (6 m), FL0910 (10 m), FL0915 (15 m), FL0920 (20 m). • DAP Audio DMX adapter: 3-pin/5-pin. Ordercode FLA30. Ordercode: 50787... -
Page 10: Maintenance
RDM Splitter Pro 4 Channel DMX Maintenance The Showtec RDM Splitter Pro 4 Channel DMX requires almost no maintenance. However, you should keep the unit clean. Disconnect the mains power supply, and then wipe the cover with a damp cloth. - Page 11 Turn up the air conditioning LEDs/lamp cuts out intermittently • Disconnect the fixture and return it LEDs/lamp damaged to your dealer The power supply settings do not • Disconnect fixture. Check settings match local AC voltage and and correct if necessary frequency Ordercode: 50787...
-
Page 12: Product Specifications
RDM Splitter Pro 4 Channel DMX Product Specifications Model: Showtec RDM Splitter Pro 4 Channel DMX Input voltage: 100-240V AC, 50/60Hz Output channels: 4 DMX/RDM channels Control protocols: DMX-512/RDM Connections: Pro power connector IN, 3-pin/5-pin DMX IN, 3-pin/5-pin DMX THROUGH, 4 x 3-pin DMX/RDM OUT, 4 x 5-pin DMX/RDM OUT Housing: Metal &... -
Page 13: Notes
RDM Splitter Pro 4 Channel DMX Notes Ordercode: 50787... - Page 14 RDM Splitter Pro 4 Channel DMX Ordercode: 50787...
- Page 15 RDM Splitter Pro 4 Channel DMX Ordercode: 50787...
- Page 16 ©2017 Showtec...
Need help?
Do you have a question about the 50787 and is the answer not in the manual?
Questions and answers