Angle Adjustment; Beam Angle Adjustment - SHOWTEC ACT Profile 50 RGBAL User Manual

ACT Profile 50 RGBAL

Angle Adjustment

You can adjust the angle of the device with the adjustment handle (03).
Turn the adjustment handle (03) counterclockwise to loosen it.
Tilt the device to the desired angle (see Fig. 10).
Turn the adjustment handle (03) clockwise to tighten it.
Note:
Make sure that the device cannot move freely after the adjustment handle (03) is tightened.

Beam Angle Adjustment

The beam angle of the ACT Profile 50 RGBAL can be adjusted manually in the range 14°–32°. To adjust
the beam angle, follow the steps below:
Turn the focus control (04) and the zoom control (05) counterclockwise to loosen them.
Slide the controls forwards or backwards to achieve the desired beam angle (see Fig. 11).
Once the fixture is focused, turn the focus control (04) and the zoom control (05) clockwise to tighten
them. Do not overtighten them.
Product code: 34033
15
Fig. 10
Fig. 11