Technical Specifications; General Specifications; Power Supply Specifications - Siemens SIMATIC NET RUGGEDCOM RST2228P Equipment Manual

Technical specifications

This section provides important technical specifications related to the device.
Note
Technical specifications related to modules are detailed separately in the
"RUGGEDCOM Modules Reference Manual" [https://support.industry.siemens.com/cs/
ww/en/ps/24744/man].
For technical specifications related to SFP transceivers, refer to the
SFP Transceivers Reference Manual" [https://support.industry.siemens.com/cs/ww/en/
ps/24744/man].
5.1

General specifications

Insulation
Overvoltage category
5.2

Power supply specifications

Power supply
Power
supply type
12 VDC (Single)
24 VDC (Single)
48 VDC (Single)
HI AC/DC
a
Voltage must be measured at the input power terminal.
b
Based on nominal input voltages and 60 W output load.
c
Rated at frequency range 47-63 Hz.
RUGGEDCOM RST2228P
Equipment Manual, 10/2023, C79000-G8976-1403-17
Input
Minimum Nominal
10.5 VDC 12 VDC
13 VDC 24 VDC
36 VDC 48 VDC
88 VDC 125-250 VDC
c
85 VAC 110-230 VAC
Class I
OVC II
a
Maximum
15 VDC
36 VDC
72 VDC
300 VDC
c
264 VAC
"RUGGEDCOM
Maximum power Wire gauge
b
consumption
77 W
72 W
72 W
77 W/ 76W
75 W/ 75W
5
#14
#14
#16
#18
53