Midi Utility Function Settings; Midi Related Parameters - Roland GP-100 Owner's Manual

MIDI Utility Function Settings
The following pages explain the MIDI-related utility functions of
the GP-100. Make settings as needed for your situation. The
following utility functions are provided.
MIDI Channel
MIDI Omni Mode
MIDI OUT/THRU
MIDI Bulk Dump
MIDI Bulk Load
MIDI MCR-8 Edit
MIDI MCR-8 CH
MIDI Map Select
MIDI Program Change Map
(Procedure)
* When using the following functions, please refer to the procedure
given for each function.
MIDI Bulk Dump
MIDI Bulk Load
MIDI Program Change Map
1 2 3
PARAMETER — VALUE
1 Press the [UTILITY] button enough times to get the desired
MIDI related item to appear in the display. Each press of the
button takes you to the next one of the following items.
* When you have gone through all items the first one will reappear.
* While utility function settings are being made, the button indicator
will be lit.
«Function Setting»
«MIDI Settings»
MIDI Channe
Channel =
Make settings for operation via MIDI.
<Harmonist Settings>
<FC-200 Settings>
2 Rotate the PARAMETER knob until the parameter you wish to
set appears in the display.
З Use the VALUE knob to modify the value.
Section 4 Using MIDI
4 Repeat steps 2—3 tosetthe desired utility function parameters.
5 Press the [EXIT] button to end the procedure.
MIDI Related Parameters
MIDI Channel: 1—16
MIDI Channel
Channel = 1
Set the MIDI channel used for transmitting and receiving MIDI
messages.
* The "Device ID" specified when handling exclusive messages will be
the same as the MIDI channel.
* With the factory settings, the MIDI channel will be channel 1.
MIDI Omni Mode: On, Off
MIDI Omri Mode
Omri On
If Omni Mode is turned on, MIDI data will be received on all
channels, regardless of the MIDI Channel setting.
* Even if Omni Mode is turned on, exclusive messages will be received
only on the channel (i.e., Device ID) that matches the MIDI Channel
setting.
* With the factory settings, the setting is Omni On.
MIDI OUT/THRU: MIDI OUT, MIDI THRU
MIDI OUT"THRU
MIDI OUT
This determines the function of the MIDI OUT/THRU connector,
MIDI OUT: It will function as a MIDI OUT connector. Use this
setting when you wish to transmit bulk data.
MIDI THRU: | It will function as a MIDI THRU connector. MIDI
messages input at the MIDI IN connector will be
retransmitted just as they are from the MIDI THRU
connector.
* With the factory settings, "MIDI OUT" is selected.
53