Roland GP-100 Owner's Manual page 48

Section 3 Effect Guide
Send/Retum
Make these settings when you connect an external effect device to
the SEND/RETURN jacks.
Mode
Specifies the function of the SEND/RETURN jacks.
Normal:
In this mode the jacks will function as normal SEND/RETURN
Jacks.
Direct Mix:
Inthis mode the sound that passed through the send/return will
be mixed with the direct sound.
Branch Out:
In this mode, the SEND jacks will be used as branch outputs.
The output from the GP-100 will not be affected.
Type
Select whether the SEND/RETURN jacks will be used as a stereo
pair, or as two independent systems.
External Device
END 2ÍINPUTRA OUTPUT
END 1 RN 1
External Device
INPUT ourPur [ВЕ
u External Device
D2|iNPUT OUTPU
External Device
INPUT
External Device
INPUT OUTPUT
Stereo:
The SEND/RETURN 1,2 Jacks will function as stereo L and R.
S/R1->S/R2:
SEND/RETURN 1 and SEND/RETURN 2 will be connected in
series.
S/R1&S/R2:
SEND/RETURN 1 and SEND/RETURN 2 will be connected in
parallel.
* Beaware that if you set the type to "S/R1&S/R2" and turn on only one
of them, the direct sound will be mixed in. If you wish to use only one
set, use a setting of "S/R1-»S/R2".
48
«When type is set to "S/R1-»5/R2"»
Select
Select the SEND/RETURN Jack you wish to use.
Send Level
Adjusts the output level of the SEND Jack.
Slow Gear
This effect automatically simulates the "violin-style" playing tech-
nique in which the volume is turned down at the beginning of a
note and then gradually raised. И decreases the volume of the
attack portion of the input signal, and then gradually raises the
volume.
Sensitivity
Adjusts the way in which the Slow Gear effect will be applied. For
lower settings, the effect will be applied only for high input levels.
As the setting is increased, the effect will be applied to lower input
levels as well.
Rise Time
Adjusts the time over which the volume increases.