Roland GP-100 Owner's Manual page 56

Section 4 Using MIDI
2 Rotate the PARAMETER knob until the following parameter
appears in the display.
MIDI Bulk Load
Maitina...
З Transmit data from the transmitting device. When the GP-100
receives data, the following display will appear.
MIDI Bulk Laad
Receivind...
When data reception is complete, the following display will
appear.
MIDI Bulk Load
Idling...
At this time, data may continue to be received.
4 Press the [EXIT] button to end the procedure.
56
When using Program Change messages sent from an external
MIDI device to select GP-100 Patches, you can freely specify the
correspondence between the Program Change number that was
received and the GP-100 Patch that will be selected.
(Procedure)
1 Pressthe [UTILITY] button several times until the MIDI-related
items appear inthe display. Each time you press the button, the
following items will be successively selected.
* When all items have been cycled through, you will return to the
original display.
*While making Utility function settings, the button indicator will be
lit.
«Function Settings»
«MIDI-Related Settings»
MIDI Channel
Channel -
Make settings for MIDI operations.
«Harmonist Settings»
«FC-200 Settings»
2 Rotate the PARAMETER knob until the parameter you wish to
set appears in the display.
3 Use the VALUE knob to modify the value.
4 Repeat steps 2—3 to make Program Change Map settings.
5 Press the [EXIT] button to end the procedure.