Examples Of System Setup - Roland GP-100 Owner's Manual

Section 5 Appendix
Controlling two or more parameters
simultaneously
When using an expression pedal to control two or more param-
eters simultaneously, you can adjust the effective range of the
pedal independently for each parameter for more effective con-
trol. With the following settings, the Feedbacker will be triggered
when you begin depressing the expression pedal, and continuing
to depress the pedal will allow you detailed control over the
Feedbacker vibrato.
Control Assign: 2to8
Target FB:Trigger
Target Min Off
Target Max On
Source EXP PEDAL or MIDI CTL #7
(Source Mode Normal)
Source Act.Range Lo 0
Source Act.Range Hi 5
Target FB:Vib Rate
Target Min 60
Target Max 80
Source EXP PEDAL or MIDI CTL #7
(Source Mode Normal)
Source Act.Range Lo 5
Source Act.Range Hi 64
Target FB:Vib Depth
Target Min 0
Target Max 20
Source EXP PEDAL or MIDI CTL #7
(Source Mode Normal)
Source Act.Range Lo 5
Source Act.Range Hi 127
68
Examples of System Setup
BasicSetup
OUTPUT
L(MONO)
Е EISE
Power И
Amplifier
Speaker Box
GLOBAL
Amp Being Used Solid State
SP Being Used Stack
SP Color Adjust
* When using a guitar amp that does not have a main input, connect the
GP-100 to the LOW input of the guitar amp, and set the tone controls
toa flat state (for a 3-tone control, set bass and treble to 0, and middle
to 10).
Switching between lead and rhythm
OUTPUT B
L(MONO)
OUTPUTA
L(MONO)
MAIN IN (REAR)
Speaker Box