Selecting An Effect Sound; Selecting Effect Sounds Fromthe Front Panel; Selecting Effect Sounds With A Foot Switch - Roland GP-100 Owner's Manual

Selecting an Effect Sound
Effect sounds are organized as Patch numbers 1—400. To select
an effect sound, use the front panel knob or an external device (a
foot switch, or a MID! device such as a MIDI foot controller) to
select a Patch number.
Patch numbers can be selected only when the Play page (the
screen that shows the Program number) appears in the display. If
something other than the Play page is shown in the display, press
the [EXIT] button to return to the Play page.
Selecting Effect Sounds fromthe Front
Panel
моми;
PAMP GLOBAL Томат ШЫГУ PARAMETER icy
Coo oc
weve ап METER тест
CoCo CoC
Algorithm Name
(M --BASIC~-
Sample Setting
Patch Name
Rotate the NUMBER knob. As you rotate itto the right, successively
higher Patch numbers will be selected. Rotating it to the left will
select lower Patch numbers. When you select a Patch number, the
name of the corresponding algorithm and the Patch name will
appear in the display.
Selecting Effect Sounds with a Foot
Switch
Ifa BOSS FS-5U foot switch (optional) is connected, you can select
Patches by pressing the foot switch,
* If you wish to use this function, make the following settings. For
details refer to "Control 1/2 jack" (p. 28).
<UTILITY>
CONTROL 1 jack: Number Up
CONTROL 2 Jack: Number Down
* Connect the foot switch with the GP-100 power turned off. If the power
is on when you connect it, the Patch may change accidentally.
* When using a foot switch, be aware that holding down the foot switch
will not cause the Patch numbers to continue changing in succession.
* When using a foot switch to change Patches, you may specify the range
of Patches that can be selected. For details referto "Number up/down"
(p. 28).
Section 1 Try out the GP-100
If you use two foot switches, you can select Patches by foot in the
same way as by rotating the NUMBER knob.
(White) | CONTROL 1
CONTROL = (Number Up)
v2
acm
es CONTROL 2
Cord:Roland PCS-31 (Number Down)
(Optional)
Foot Switch FS-5U
(Optional)
If you use only one foot switch, you can use it to move either up
or down (not both) through the Patch numbers.
CONTROL
v2
Q ав = L3 CONTROL 1
Foot Switch FS-5U
(Optional)
Selecting Effect Sounds with an FC-
200 MIDI Foot Controller
When an FC-200 MIDI foot controller (optional) is connected,
you can use pedal operations to select Patches. For details refer
to "GP-100 Operation Using the FC-200" (p. 58).
Selecting Effect Sounds by MIDI
Messages
GP-100 Patches can be selected by Program Change messages
from an external MIDI device. The correspondence between
program numbers and GP-100 Patch numbers can be changed by
modifying the settings of the Program Change Map (p. 56).
11