Parameter Functions Диирин Баайа Алин); Өы Не Ненин Ee Ыыы Нө; Compressor, Compressor/Limiter - Roland GP-100 Owner's Manual

Section 3 Effect Guide
Parameter Functions
* in this section, the sound being input to each effect is referri
"direct sound" and the sound modified by the effect is referred to as
the "effect sound."
Chorus
This effect adds spaciousness and depth to the sound.
Mode
Selection for the chorus mode.
Mono: A mono chorus.
Stereo: A stereo chorus.
Rate
Adjusts the modulation speed of the chorus.
Depth
Adjusts the modulation depth of the chorus.
Pre Delay
Adjusts the time interval between the direct sound and when the
chorus sound begins.
Low Pass Filter
Adjusts the frequency at which the low pass filter begins to be
applied. When "Thru" is selected, the low pass filter will not
function.
Effect Level
Adjusts the volume of the chorus sound.
40
A compressor reduces loud input levels and brings up soft input
levels, to create a more consistent output volume.
A limiter reduces loud input levels to prevent distortion.
Mode 'only for Compressor/Limiter
Select either Compressor or Limiter.
«When "Limiter" is selected»
Threshold
Adjust this as appropriate for the input signal from your guitar.
When the input signal level exceeds this threshold level,
limiting will be applied.
Release
This adjusts the time from when the signal level drops below
the threshold until when limiting is removed.
Limiter Level
This adjusts the volume.
Tone
Adjusts the tone.
«When "Compressor" is selected»
Sustain
Adjusts the range (time) over which low-level signals are
boosted. Larger values will result in longer sustain.
Attack
Adjusts the strength of the picking attack. Larger values will
result in a sharper attack, creating a more clearly defined
sound.
Level, Compressor Level
Adjusts the volume
Tone
Adjusts the tone.