Program Change Map Settings; Program Change Map Parameters - Roland GP-100 Owner's Manual

Section 4 Using MIDI
Program Change Map Parameters
MIDI Map Select
MIDI Mar
When Program Change messages are received, this setting deter-
mines whether Patches will be selected as determined by the
Program Change Map settings, or as determined by the default
settings.
Prog: The Patch numbers specified by the Program Change Map
will be selected.
Fix: — The Patch numbers of the default settings will be selected.
Forthe contents of the default settings, referto "Using Bank
Select messages to select Patches" (p. 71).
MIDI Program Map
MIDI Program Мағ
Ba PR 13% 1
Bank Select GP-100
Number Patch Number
Program
Number
Make settings for the Program Change Map. Use the PARAMETER
knob to select the Bank Select number and Program number, and
use the VALUE knob to specify the GP-100 Patch that will be
selected by that incoming message.
* If you want to select GP-100 Patches without using Bank Select
messages, i.e., using only Program Change messages, set Program
Change numbers (1—128) for Bank Select number "0."
57