Roland GP-100 Owner's Manual page 75

Guitar preamp/processor
Hide thumbs Also See for GP-100:
Table of Contents

Advertisement

Specifications
GP-100: GUITAR PREAMP/PROCESSOR
AD Conversion (INPUT)
22 bit (AF Method) 128 times Oversampling AD modulation
АР Conversion (RETURN)
18 bit linear 128 times Oversampling AXimodulation
DA Conversion
18 bit linear
Sampling Frequency
44.1 kHz
Program Memories
400: 200 (User) + 200 (Preset)
Nominal Input Level
INPUT:
-10 dBm / +4 dBm
RETURN:
-10 dBm / +4 dBm
Input Impedance
INPUT:
1MQ
RETURN:
100 kQ
Nominal Output Level
OUTPUT:
-10 dBm/ +4 dBm
SEND:
-10 dBm / +4 dBm
Output Impedance
OUTPUT:
2kQ
SEND:
2kQ
Dynamic Range
108 dB or greater
Control
INPUT Level Knob
OUTPUT Level knob
<PREAMP>
VOLUME Knob
BASS Knob
MIDDLE Knob
TREBLE Knob
PRESENCE Knob
MASTER Knob
<Other>
PARAMETER Knob
NUMBER/VALUE Knob
PREAMP Button
GLOBAL Button
TUNER Button
UTILITY Button
WRITE Button
EXIT Button
METER Button
EFFECT Button
POWER Switch
Section 5 Appendix
Display
16 charactors, 2 lines (backlit LCD)
indicators
CLIP Indicator
SIGNAL Indicator
Button Indicators
Connectors
«Front»
INPUT Jack
HEADPHONES Jack
«Rear»
INPUT Jack
SEND Jacks 1/2
RETURN Jacks 1/2
OUTPUT Jacks A (LIMONOY/R)
OUTPUT Jacks B (LI:MONOY/R)
EXTERNAL CONTROL Jacks 1/2
EFFECT REMOTE/EXPRESSION Jack
CONTROL 1/2 Jack
MIDI OUT / THRU Connector
Power Supply
AC117 V, АС230 V or АС240 V
Power Consumption
13W
Dimensions
482 (W) x 299 (D) x 44 (H) mm
19 (W) x 11-13/16 (D) x 1-3/4 (H) inches
Weights
3.6 kg/ 7 lbs 15 oz
Accessories
Owner's Manual
Options
MIDI FOOT CONTROLLER FC-200
Foot Switch: DP-2, FS-1, FS-SU/5L(BOSS)
EXPRESSION PEDAL EV-5, FV-300L(BOSS)+PCS-33
MULTI CONTROLLER MCR-8
*0 dBm = 0.775 dBm
* The specifications for this product are subject to change without prior
notice.
About the AF(Advanced Forcus) Method
This newly developed AD conversion process virtually eliminates
all quantization noise, and dramatically improves overall dy-
namic range.
It accomplishes this by using two types of AD
converters (with different input levels) to convert audio signals into
data in combination with a unique DSP method for creating a
composite of the separately obtained data streams.
Since the GP-100 uses two 18-bit AD units for processing sound,
the length ofthe AD conversion data is extended to 22 bits after the
AF process. Actual test results have yielded a dynamic range in
excess of 118 dB in the GP-100's AD section, testifying to the
extremely clear sound quality that can be achieved with this
processing method.
75

Advertisement

Table of Contents
loading

Table of Contents