Effect On/Off Settings; Effect Sound Settings - Roland GP-100 Owner's Manual

Gain: Low, Middle, High
CPREAMF ] F
Gain Middle
Adjusts the distortion of the amp. Increasing distortion will be
produced in the order of Low, Middle, and High.
Section2 Modifying various settings
Effect Sound Settings
Although each algorithm is unique because it uses a particular
selection of effects which are configured in a certain way, the basic
procedure for creating sounds is the same. Here we will explainthe
procedure for making effect parameter settings. For an explanation
of each parameter, refer to "Section 3 Effect Guide" (p. 30).
How the parameters are organized
The GP-100 lets you access all parameters of the algorithm using
only the PARAMETER knob. As you rotate the PARAMETER knob
to the right, the parameters will appear in the following order.
Effect on/off and effect connection order
Parameters for each effect
Realtime control of parameters
Effect name
The Skip function
(When selecting a parameter)
When calling up a parameter in the display, you can jump to the
first parameter of each effect by pressing the PARAMETER knob as
you rotate it.
(When modifying a value)
When modifying a value, you can more rapidly make the value
change by pressing the VALUE knob as you rotate it.
Effect On/Off Settings
Each algorithm combines the use of a multiple number of effects.
you can turn on whichever effects you wish to use, while effects
you do not wish to use can be turned off. Effects that have been
turned on are indicated by a e, displayed at the right of the effect
name.
* The effect names are displayed in abbreviated form. To see the effect
names in full, refer to "Section 3 Effect Guide" (p. 30).
(Procedure)
1 2
PTEAMP GLOBAL runen uny PARAMETER OM
vem ENM матат аст
See жле
1 Use the PARAMETER knob to move the cursor (underline) to
the name of the effect which you want to turn on/off.
2 Press the VALUE knob to switch the effect on/off.
Effecton: @
Effect off: _
3 Repeat steps 1—2 to turn each effect on/off.
19