Storing The Modified Settings (The Write Operation) - Roland GP-100 Owner's Manual

Section 2 Modifying various settings
Storing the Modified Settings
(The Write Operation)
Patch settings you modify are temporary, and will return to the
unmodified settings when you turn off the unit or select another
Patch. If you wish to keep the modified settings, use the Write
operation.
(Procedure)
2
—— Е
numecas
PARAMETER — VALUE
mona tumsa тау
SES Se
SS SS
бнаа
1,3
1 When you finish making settings, press the [WRITE] button.
The following display will appear.
Fatch write tū..
--BHSIC--
2 Use the VALUE knob to select the write-destination Patch
number.
* [f you wish to store the new settings in the original Patch number,
this step is not necessary.
* Patch numbers 201—400 are the Preset area, and cannot be used
to store your new Patches. If you have modified the settings of a
Preset area Patch, you can store it in a User area Patch number.
* To cancel the write operation and return to editing, press the
[EXIT] button.
З Press the [WRITE] button and the modified settings will be
stored in the Patch number you specified in step 2.
When the Write operation is completed, the Play page will
reappear.
24
the Meter Function
When the Meter function is used, the output level of the specified
effect will be shown in the display together with a graphic level
meter. The SIGNAL Indicator and CLIP Indicator will also light to
indicatethe output level ofthe specified effect. This is a convenient
way to check the output level of each effect.
Input
BHEHEERERE
AAA AA A
bbb po б
(Procedure)
p
моме!
PARAMETER VALUE
PREAMP GLOBAL TUNER — UTRITY
c:
WRITE EXIT METER — EFFECT
C ca
4 1,4
1 Press the [METER] button.
The button indicator will light, and the display will show the
name of the effect whose output level and meter graphic is
displayed.
2 Use the VALUE knob to select the effect you wish to display.
З Repeat step 2 to check the output level of each effect.
4 Press the [METER] or [EXIT] button to end the procedure.