About The System Status Led States - VERITAS 5150 Hardware Installation Manual

About the System Status LED states

Power button LED states
Table 1-3
State Power Mode
Power - off Non-ACPI
Power - on Non-ACPI
The System Status LED is a bi-color (Green/Amber) indicator that shows the current
health of the system. The appliance provides two locations for this feature. The first
location is on the Front Control Panel, while the second location is on the back edge
of the server board.
System Status LED states
Table 1-4
Color State
No Off - The
color system is not
operating.
Green Solid on (SO)
LED
Off
On
Criticality Description
Not ready System power is off (AC and/or DC)
■
System is in EuP Lot6 Off Mode
■
System is in S5 Soft-Off State
■
Healthy Indicates that the system is running (in S0 State)
and its status is "Healthy". The system does not
exhibit any errors. AC power is present and BMC
has started and manageability functionality is up
and running.
Hardware overview
Appliance control panel
Description
The system power is off, and the
BIOS has not initialized the chipset.
The system power is on and the
green Power button LED is active.
9