Step 7. Mount The Backup Gateway - Tesla Powerwall 2 AC Installation Manual

Step 7. Mount the Backup Gateway

1. Determine the mounting location. The Backup Gateway enclosure has 3 mounting holes
(shown below in red). If needed, two additional mounting points (shown below in grey) are
also available. To use these additional mounting points, the back panel must be removed and
the points drilled out.
Figure 27: Backup Gateway Mounting Hole Locations (Back View)
2. Drill pilot holes in the mounting surface for the fasteners.
3. Attach the Backup Gateway enclosure to the mounting surface. Use a level tool to ensure
that the enclosure is level.
27