Step 8. Connect Powerwall and the Backup Gateway
1. Using the provided Torx T20 bit, remove the cover from the wiring compartment on the left
side of Powerwall.
Figure 29: Removing the Wiring Compartment Cover
Depending on local requirements, Powerwall wiring can be installed through conduit or
through a cable gland. Refer to local codes to determine wiring requirements.
Figure 30: Powerwall 2 AC Wiring Compartment Inlet and Connectors
1
Communication OUT Connector (for daisy-chaining multiple Powerwalls)
2
Communication IN Connector (for single Powerwall or each Powerwall in a chain)
3
AC Connector
4
Ground Lug
29