Tesla Powerwall 2 AC Installation Manual page 15

4. Verify that the contents of the bracket box and accessory bag are complete and
undamaged (see "Powerwall Box Contents," above).
5. Remove the top panel and set it aside.
Figure 5: Removing the Top Panel
6. Find the bottom of Powerwall by identifying the feet at the base of the unit.
7. Remove the piece of foam next to the bottom of Powerwall.
8. Open the bottom edge of the box (nearest the bottom of Powerwall) by removing the
staples and folding the cardboard back.
Figure 6: Opening the Bottom of the Powerwall Box
9. Optional: Remove the foam blocks from the top panel and use the cardboard as protective
padding on the lift equipment.
10. Move the lift equipment into place next to the bottom of the Powerwall box.
13