Table of Contents
Advertisement
Chapter 3: System Setup
Installing Memory Modules
Before beginning the memory installation, please pay attention to the
following notices.
•
Before installing or removing internal components on the
motherboard, please ensure that the AC power cord is unplugged for
at least over 20 seconds.
•
The memory modules are foolproof design and can only be installed
in one direction. If you encounter difficulty, try reversing the module's
orientation and avoid using force to prevent damage.
•
It is recommended to install memory modules with the same brand,
speed, and capacity.
•
This motherboard supports up to 1024GB RDIMM DDR5 ECC memory
with speeds up to 4800MT/s (1DPC) in 16 DIMM slots.
Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved.
1.
Locate the DIMM sockets on the motherboard and release the locks.
Refer to
next page
for more detailed layout of the CPU sockets and
memory slots.
44
NSA 7160R User Manual
Advertisement
Table of Contents
Need help?
Do you have a question about the NSA 7160R and is the answer not in the manual?
Questions and answers