Chapter 3: System Setup; Removing The Chassis Cover - Nexcom NSA 7160R User Manual

Chapter 3: System Setup

C 3: s
haPter ystem

Removing the Chassis Cover

Prior to removing the chassis cover, make sure the unit's power
CAUTION! CAUTION!
CAUTION! is off and disconnected from the power sources for 20 seconds
to prevent electric shock or system damage.
1. The screws on the top and sides are used to secure the cover to the
chassis. Remove these screws and put them in a safe place for later use.
Screws on the sides
Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved.
s
etuP
36
Screws on the top
2. With the screws removed, gently slide the cover outwards and then lift
up the cover to remove it.
NSA 7160R User Manual