Related Manuals for Nexcom NViS 2280
Summary of Contents for Nexcom NViS 2280
-
Page 1: User Manual
NEXCOM International Co., Ltd. Intelligent Digital Security Intelligent Survillance Solution NViS 2280 User Manual NEXCOM International Co., Ltd. www.nexcom.com Published May 2012... -
Page 2: Table Of Contents
Chapter 2: Jumpers and Connectors Power Ignition............22 Internal Connectors ............. 23 Before You Begin ................9 Precautions ..................9 Mini-PCIe Slot 1 (3.5G)..........23 Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 6210 / 6220 User Manual... - Page 3 Power Ignition Connector ......... 37 Appendix F: MCU Programming (NISKIG120) Chapter 3: System Setup Installing a SATA Hard Drive ............38 Removing the Chassis Cover ............40 Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 6210 / 6220 User Manual...
-
Page 4: Preface
Acknowledgements The product(s) described in this manual complies with all applicable NViS 2280 is a trademark of NEXCOM International Co., Ltd. All other European Union (CE) directives if it has a CE marking. For computer product names mentioned herein are registered trademarks of their systems to remain CE compliant, only CE-compliant parts may be used. -
Page 5: Rohs Compliance
RoHS Compliance introduction of green products. The task force will ensure that we follow the standard NEXCOM development procedure and that all the new NEXCOM RoHS Environmental Policy and Status Update RoHS components and new manufacturing processes maintain the highest industry quality levels for which NEXCOM are renowned. -
Page 6: Warranty And Rma
• Replace with 3rd party products if needed. Form” for the RMA number apply process. • If RMA goods can not be repaired, NEXCOM will return it to the cus- • Customers can send back the faulty products with or without accessories tomer without any charge. -
Page 7: Safety Information
Warranty and RMA • If RMA goods can not be repaired, NEXCOM will return it to the • Avoid using the system near water, in direct sunlight, or near a heating customer without any charge device. • The load of the system unit does not solely rely for support from the Warnings rackmounts located on the sides. -
Page 8: Safety Precautions
The equipment does not work well, or you cannot get it to work the equipment to the power outlet. according to the user’s manual. viii Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual... -
Page 9: Technical Support And Assistance
Conventions Used in this Manual Technical Support and Assistance Warning: Information about certain situations, which if not 1. For the most updated information of NEXCOM products, visit observed, can cause personal injury. This will prevent injury NEXCOM’s website at www.nexcom.com. -
Page 10: Global Service Contact Information
No. 450 Caoyang Rd., Shanghai, 200062, China Tel: +1-510-656-2248 Tel: +39 02 9628 0333 Tel: +86-21-6150-8008 Fax: +1-510-656-2158 Fax: +39 02 9619 8846 Fax: +86-21-3251-6358 http://www.nexcom.com http://www.nexcom.eu http://www.nexcom.cn Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual... - Page 11 Fax: +86-27-8722-7400 Tel: +81-3-5419-7830 http://www.nexcom.cn Fax: +81-3-5419-7832 http://www.nexcom-jp.com China-Chengdu Office 9F, Shuxiangxie,Xuefu Garden, No.12 Section 1, South Yihuan Rd., Chengdu, 610061,China Tel: +86-28-8523-0186 Fax: +86-28-8523-0186 http://www.nexcom.cn Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual...
-
Page 12: Package Contents
Package Contents Package Contents Before continuing, verify that the NViS 2280 package that you received is complete. Your package should have all the items listed in the following table. Item Description Quantity NViS 2280 system unit TERMINAL BLOCKS 2P Connector... -
Page 13: Ordering Information
• Anti-vibration kit (P/N: 88C00228000X0) • 9~36V power ignition module (NISKIG120) (P/N: 10JKIG12000X0) • VMD 1000-B 7-inch WVGA LCD with touch screen vehicle display (P/N: 10VD0100000X0) xiii Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual... -
Page 14: Chapter 1: Product Introduction
• Dual 2.5” hot-swappable HDD trays • 9~36V DC wide range power input • Optional power ignition • 4 -Port Gigabit PoE • Optional In-Vehicle Display Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual... -
Page 15: Hardware Specifications
• Optional power adapter • 1x DB15 VGA port • 1x HDMI Dimensions • 1x RS232/422/485 with isolated 3kV (COM1) • 235mm(W) x 268mm(D) x 101mm(H) Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual... - Page 16 • Relative humidity: 10% to 90% (non-condensing) • Vibration: STD-810F-514.5 C3- Composite wheeled vehicle (SSD with vibration kit) Certifications • CE approval • FCC Class A • e13 mark Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual...
-
Page 17: Knowing Your Nvis 2280
USB2.0 Ports Used to insert a SIM card. Two USB2.0 ports to connect the system with USB2.0/1.1 devices. Line-out Line-out jack to connect speakers or headphones. Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual... - Page 18 ACT1 Indicates the network activity of LAN1 connection located on the rear panel. ACT2 Indicates the network activity of LAN2 connection located on the rear panel. Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual...
- Page 19 Dual Gigabit LAN ports to connect the system to a local area network. USB2.0 Ports COM1 RS232/422/485 Two USB2.0 ports to connect the system with USB2.0/1.1 devices. Used to connect RS232/422/485 compatible serial devices. Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual...
- Page 20 The GPIO connector supports 4 digital input and 4 digital output. Power Ignition Used to connect to power ignition module (NISKIG120). Antenna Holes Empty antenna holes reserved for WWAN/WLAN/GPS external antennas. Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual...
-
Page 21: Mechanical Dimensions
Chapter 1: Product Introduction Mechanical Dimensions 235.00 243.00 255.00 Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual... -
Page 22: Chapter 2: Jumpers And Connectors
• Use correct screws and do not over tighten screws. touching a metal object. Static electricity can damage many of the electronic components. Humid environments tend to have less static Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual... -
Page 23: Jumper Settings
(on) and open (off). Two-Pin Jumpers: Open (Left) and Short (Right) Three-Pin Jumpers: Pins 1 and 2 Are Short Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual... -
Page 24: Locations Of The Jumpers And Connectors
The figure below shows the location of the jumpers and connectors. SATA0 SATA1 SATA3 USB1 SATA2 SATA4 LAN1 LAN2 CN11 CN17 CN18 CN12 CN19 FAN1 CN10 CN13 CN15 Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual... -
Page 25: Jumpers
Connector location: JP2 Connector location: JP1 Settings Definition 1-2 On Normal VCC3 2-3 On Clear BIOS VCC_SEL VCC5 1-2 On: default 2-3 On: default Definition I_RTCRST# Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual... -
Page 26: Connector Pin Definitions
Flashing yellow Transmitting at 10/100Mbps BI_DC+ No connection BI_DC- BI_DB- BI_DD+ Status BI_DD- Steady yellow Powered Device (PD) compliant device detected. No PD compliant device detected Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual... -
Page 27: Line-Out Jack
Chapter 2: Jumpers and Connectors Line-out Jack Mic-in Jack Connector type: 3.5mm TRS Connector type: 3.5mm TRS Definition Definition AU_GND SPK_Out_R MIC_OUT-L AU_GND MIC_JD1 SPK_Out_L MIC_OUT-R Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual... -
Page 28: Usb Ports (Usb1 - Usb2)
Chapter 2: Jumpers and Connectors USB Ports (USB1 – USB2) Connector type: USB port Definition VCC5 DATA_N DATA_P Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual... -
Page 29: External I/O Interfaces - Rear Panel
GREEN_VGA BLUE_VGA HDMI_DATA2_P HDMI_DATA2_N HDMI_DATA1_P HDMI_DATA1_N VCC5 HDMI_DATA0_P HDMI_DATA0_N HDMI_CLK_P DDCDATA_VGA HSYNC_VGA HDMI_CLK_N VSYNC_VGA DDCCLK_VGA REAR_MTH_GND REAR_MTH_GND HDMI_CTRL_CLK HDMI_CTRL_DATA REAR_MTH_GND REAR_MTH_GND HDMI_VCC5 REAR_MTH_GND REAR_MTH_GND HDMI_HPD_R RED_VGA Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual... -
Page 30: Usb Ports
Connector type: Dual USB port Connector type: eSATA port Connector location: USB1A Connector location: USB1B Definition Definition Definition Definition P5V_USB_P45 USB_4N_L SATA_RXP5 USB_4P_L SATA_RXN5 P5V_USB_P45 USB_5N_L SATA_TXN5 SATA_TXP5 USB_5P_L REAR_MTH_GND Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual... -
Page 31: Lan Ports
3VSB Steady orange 100Mbps connection detected L2_LED0 L2_LED2 Off (with network cable plugged) 10Mbps connection detected REAR_MTH_GND REAR_MTH_GND REAR_MTH_GND Off (No network cable plugged) No link Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual... -
Page 32: Com1 Serial Port
+12V DC Output Connector type: DB-9 port Connector type: 2-pin switch Connector location: CN1 Connector location: CN4 Definition Definition Definition SP1_DCD SP1_RXD SP1_TXD SP1_DTR SP1_DSR SP1_RTS SP1_CTS SP1_RI Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual... -
Page 33: Dc In 9V~36V
Panel_control LCDD09(OUT3) LCDD01(OUT0) LCDD08(OUT3#) LCDD00(OUT0#) LCDD_GND LCDD_GND LCDD07(CLK) LCDD03(OUT1) LCDD06(CLK#) LCDD02(OUT1#) LVDS_GND LCDD_GND LCDD05(OUT2) Power on push button LCDD04(OUT2#) Panel_backlight LCDD_GND Panel-Gnd USB_0# Contact_DET# USB_0 USB_VCC Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual... -
Page 34: Com2 Serial Port
(4 digital input and 4 digital output) Connector type: DB-10 port Definition Definition Definition Definition SP2_DCD SP2_RXD VCC5 SP2_TXD SP2_DTR SIO_GPO24 SIO_GPI20 SP2_DSR SIO_GPO25 SIO_GPI21 SP2_RTS SP2_CTS SIO_GPO26 SIO_GPI22 SP2_RI SIO_GPO27 SIO_GPI23 Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual... -
Page 35: Power Ignition
Chapter 2: Jumpers and Connectors Power Ignition Connector type: 3-pin switch Definition Definition PWRBTN# SLP_S3# Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual... -
Page 36: Internal Connectors
Definition Definition I_WAKE# +3VSB_MINI1 SMB_CLK PE_TX4_N SMB_DATA PE_TX4_P MINICARD1CLKREQ# UIM_PWR USB_0N_L UIM_DAT USB_0P_L CLK_PCIE4_N UIM_CLK +3VSB_MINI1 CLK_PCIE4_P UIM_RST +3VSB_MINI1 LED_WLANA_N MINICARD1DIS# PLTRST#_A PE_RX4_N +3VSB_MINI1 +3VSB_MINI1 PE_RX4_P Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual... -
Page 37: Mini-Pcie Slot 2 (Wlan)
Mini-PCIe Slot 2 (WLAN) Connector location: CN11 Definition Definition I_WAKE# +3VSB_MINI2 SMB_CLK PE_TX5_N SMB_DATA PE_TX5_P MINICARD2CLKREQ# USB_1N_L USB_1P_L CLK_PCIE5_N +3VSB_MINI2 CLK_PCIE5_P +3VSB_MINI2 LED_2WLANA_N MINICARD2DIS# I_SLOTPLTRST# PE_RX5_N +3VSB_MINI2 +3VSB_MINI2 PE_RX5_P Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual... -
Page 38: Atx Power Output Connector
Connector type: 1x12 12-pin header, 2.0mm pitch Connector location: CN6 Connector location: CN15 Definition Definition Definition Definition LOUT_JD FRONT_OUT_L MIC_1_L FRONT_OUT_R MIC_1_R MIC_1_L SLP_S3# UIM_CLK UIM_RST UIM_PWR UIM_DAT Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual... -
Page 39: Battery Connector
Connector type: 2x5 10-pin header, 2.0mm pitch Connector location: J4 Connector location: CN13 Definition Definition Definition Definition BAT_C VCC3_A VCC3_S FRONT_PWRLED# FRONT_HDDLED# LAN2_LINK# LAN1_LINK# LED2_ACTLED LED1_ACTLED PWRBTN# Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual... -
Page 40: Usb2/3 Jst Connector
Connector type: 1x10 10-pin header, 1.0mm pitch Connector location: CN8 Connector location: J6 Definition Definition Definition Definition VCC5 USB_2N USB_2P BT3.3V VCC5 USB_3N BT_AUDIO_EN USB_3P USB_6N_L USB_6P_L Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual... -
Page 41: Gps Connector
Definition Definition VCC3_A GPS_LED# M_LVDSDDCCLK M_LVDSDDCDATA TXD_C5 RXD_C5 VCC_LCD LVDS_CH_TX0_P VCC3_S LVDS_CH_TX3_P LVDS_CH_TX0_N LVDS_CH_TX3_N VCC_LCD LVDS_CH_TX1_P LVDS_CH _CLK_P LVDS_CH_TX1_N LVDS_CH _CLK_N V_INV(+12V) LVDS_CH_TX2_P V_INV (+12V) LVDS_CH_TX2_N Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual... -
Page 42: Lvds Backlight Connector
Connector type: 1x5 5-pin header, 2.0mm pitch Connector type: Standard Serial ATAII 7P (1.27mm, SATA-M-180) Connector location: J3 Connector location: SATA2 Definition Definition Definition Definition BKLTEN SATA_TXP0_C BKLTCTL SATA_TXN0_C +12V SATA_RXN0_C SATA_RXP0_C Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual... -
Page 43: Sata1 Connector
Connector type: Standard Serial ATAII 7P (1.27mm, SATA-M-180) Connector location: SATA3 Connector location: SATA4 Definition Definition Definition Definition SATA_TXP1_C SATA_TXP2_C SATA_TXN1_C SATA_TXN2_C SATA_RXN1_C SATA_RXP1_C SATA_RXN2_C SATA_RXP2_C Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual... -
Page 44: Sata3 Connector
Connector type: Standard Serial ATAII 7P (1.27mm, SATA-M-180) Connector location: SATA5 Connector location: SATA1 Definition Definition Definition Definition SATA_TXP3_C SATA_TXP4_C SATA_TXN3_C SATA_TXN4_C SATA_RXN3_C SATA_RXP3_C SATA_RXN4_C SATA_RXP4_C Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual... -
Page 45: Sata Power Connectors
Connector type: 1x4 4-pin Wafer, 2.54mm pitch Connector type: 1x2 2-pin Wafer, 1.25mm pitch Connector location: CN16 and CN14 Connector location: J2 Definition Definition Definition Definition +12V VCC5 VCC5 Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual... -
Page 46: Usb8/9 Jst Connector
Connector type: 1x6 6-pin header, 2.0mm pitch Connector location: CN10 Connector location: CN9 Definition Definition Definition Definition P5V_USB_P89 USBCON_8N P5V_USB_P1011 USBCON_10N USBCON_8P USBCON_9N USBCON_10P USBCON_11N USBCON_9P USBCON_11P Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual... -
Page 47: Com2 Connector
Connector location: CN17 Connector location: CN18 Definition Definition Definition Definition SP2_DCD SP2_RXD SP3_DCD SP3_RXD SP2_TXD SP2_DTR SP3_TXD SP3_DTR SP2_DSR SP3_DSR SP2_RTS SP2_CTS SP3_RTS SP3_CTS SP2_RI SP3_RI Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual... -
Page 48: Com4 Connector
Connector location: CN19 Connector location: J7 Definition Definition Definition Definition SP4_DCD SP4_RXD I_SLOTPLTRST# SP4_TXD SP4_DTR G_DBG33MHZ I_LFRAME# SP4_DSR I_LAD3 I_LAD2 SP4_RTS SP4_CTS I_LAD1 I_LAD0 SP4_RI 3VSB 3VSB Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual... -
Page 49: Cpu Fan Connector
Connector type: 1x4 4-pin Wafer, 2.54mm pitch Connector type: 1x4 4-pin Wafer, 2.54mm pitch Connector location: FAN1 Connector location: FAN2 Definition Definition Definition Definition +12V +12V CPUFANIN_R CPUFANOUT_R CPUFANIN2_R CPUFANOUT2_R Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual... -
Page 50: Power Ignition Connector
Chapter 2: Jumpers and Connectors Power Ignition Connector Connector type: 1x3 JST, 3-pin header, 2.0mm pitch Connector location: J5 Definition Definition PWRBTN# SLP_S3# Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual... -
Page 51: Chapter 3: System Setup
1. Loosen the 2 hand screws that secure the drive bay to the chassis. 2. Gently slide the drive bay to remove it from chassis the slot. Hand screw Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual... - Page 52 SATA drive with the mounting holes on the drive bay. facing towards the end of the drive bay. SATA Connector Mounting hole Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual...
-
Page 53: Removing The Chassis Cover
Store the screws in a safe place for later use. Mini-PCIe Slot for WLAN 2. Life up the cover and remove it from the chassis. Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual... - Page 54 Mini-PCIe Slot for LAN Wireless LAN Module Mini-PCIe Slot for WLAN Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual...
- Page 55 3. Push the module down and then secure it with mounting screws. 4. Remove the antenna hole covers located at the rear panel of the chassis. Mounting Screws Antenna Hole Covers Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual...
- Page 56 Chapter 3: System Setup 5. Insert the antenna jacks into the antenna holes. 6. Insert the rings onto the antenna jacks. Antenna Jacks Rings Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual...
- Page 57 Chapter 3: System Setup 7. Attach the RF cables of the antenna jacks onto the module. 8. Connect external antennas to the antenna jacks. RF Cables Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual...
-
Page 58: Installing A 3.5G Module
Chapter 3: System Setup Installing a 3.5G Module 1. Locate the Mini-PCI Express slot for 3.5G on the motherboard. Close-up view Mini-PCIe Slot for 3.5G Mini-PCIe Slot for 3.5G Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual... - Page 59 2. Push the module down and then secure it with mounting screws. angle until the gold-plated connector on the edge of the module completely disappears inside the slot. 3.5G Module Mini-PCIe Slot for 3.5G Mounting Screws Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual...
- Page 60 4. Remove the antenna hole covers located at the rear panel of the chassis. 5. Insert the antenna jacks into the antenna holes. Antenna Hole Covers Antenna Jacks Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual...
- Page 61 Chapter 3: System Setup 6. Insert the rings onto the antenna jacks. 7. Attach the RF cables of the antenna jacks onto the module. RF Cables Rings Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual...
- Page 62 Chapter 3: System Setup 8. Connect external antennas to the antenna jacks. Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual...
-
Page 63: Installing The Sata Dom
2. Install the SATA DOM and connect the SATA power cable to the SATA as marked. DOM connector on the motherboard. 3. Tighten the screw back on the top of the copper post. Screw SATA Connector Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual... -
Page 64: Installing A Gps Module
Chapter 3: System Setup Installing a GPS Module 1. Locate the GPS Module’s mounting holes on the chassis. Close-up view Mounting Holes Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual... - Page 65 3. Tighten screws on the mounting holes to secure the module, and connect the GPS module connector to the J8 (GPS connector) connector on the motherboard. Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual...
- Page 66 Chapter 3: System Setup 5. Insert an antenna jack into the antenna hole. 6. Connect an external antenna to the antenna jack. Antenna Jack Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual...
-
Page 67: Installing A Bluetooth Module
Chapter 3: System Setup Installing a Bluetooth Module 1. Locate the Bluetooth module’s mounting hole on the chassis. Close-up View Mounting Hole Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual... - Page 68 4. Connect the Bluetooth module connector to the J6 (Bluetooth mounting hole on the chassis. connector) connector on the motherboard. 3. Tighten a screw on the mounting hole to secure the module. Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual...
-
Page 69: Connecting To The Power Ignition Module (Niskig120)
Introduction The NISKIG120 is an external power ignition module that provides stable power to NViS 2280. Using this module will ensure that the device is well shielded against premature failure at boot/ shutdown phase. The following instructions will guide you on how to connect the NISKIG120 to the vehicle’s battery/ignition and NViS 2280. - Page 70 Chapter 3: System Setup Close-up view of the power input: Recommended wire gauge range: minimum of 10 AWG or above, maximum length of 3 meters. Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual...
- Page 71 Chapter 3: System Setup 2. Connect the module’s DC output to NViS 2280’s DC input, refer to the Close-up view of the DC output: pin/wiring definition table below: Recommended wire gauge range: minimum of 16 AWG or above, maximum length of 3 meters.
- Page 72 Chapter 3: System Setup 3. Connect the S3 control port to the Power Ignition port, refer to the pin/ wiring definition table below: Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual...
-
Page 73: Chapter 4: Bios Setup
This chapter describes how to use the BIOS setup program for the • Password protection from unauthorized use NViS 2280. The BIOS screens provided in this chapter are for reference only • Power management features and may change if the BIOS is updated in the future. -
Page 74: Default Configuration
Use the up and Press the <Del> key to enter Setup: down arrow keys to scroll through all the available fields. Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual... - Page 75 When “” appears on the left of a particular field, it indicates that a submenu which contains additional options are available for that field. To display the submenu, move the highlight to that field and press <Enter>. Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual...
-
Page 76: Bios Setup Utility
00 to 23. Minute displays minutes from 00 to 59. Second displays seconds from 00 to 59. Access Level Displays the access level of the current user in the BIOS. Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual... -
Page 77: Advanced
Select the highest ACPI sleep state the system will enter when the suspend button is pressed. Launch LAN1/2 PXE OpROM Enables or disables the boot option for legacy network devices connected to LAN1 and LAN2. Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual... - Page 78 0. XD can prevent certain classes of malicious buffer overflow attacks when combined with a supporting OS (Windows Server 2003 SP1, Windows XP SP2, SuSE Linux 9.2, RedHat Enterprise 3 Update 3). Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual...
- Page 79 This option configures the Serial ATA drives to use AHCI (Advanced Host Controller Interface). AHCI allows the storage driver to enable the advanced Serial ATA features which will increase storage performance. Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual...
- Page 80 Legacy USB Support Enable Enables Legacy USB. Auto Disables support for Legacy when no USB devices are connected. Disable Keeps USB devices available only for EFI applications. Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual...
- Page 81 Select this to change the serial port mode to RS232, RS422 or RS485. Onboard Serial Port Max Baud Rate Select this to change the max baud rate of the serial port. Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual...
- Page 82 Onboard Serial Port Max Baud Rate Select this to change the max baud rate of the serial port. Select this to change the max baud rate of the serial port. Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual...
- Page 83 Onboard Serial Port Max Baud Rate Select this to change the max baud rate of the serial port. Select this to change the max baud rate of the serial port. Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual...
- Page 84 Configure the fans to Full on Mode, Automatic Mode or Manual Mode. Detects and displays the current CPU temperature. System Temperature1/2 Detects and displays the current system temperature. CPU: Vcore Detects and displays the output voltages. Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual...
-
Page 85: Chipset
Intel IGD Configuration ® Configures the options for Intel IGD function. Memory Information Detects and displays information on the memory installed in the system. Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual... - Page 86 Select the LCD panel used by the internal graphics device. Enables or disables the high precision event timer. Active LFP M8790V Select the Active LFP configuration. Enables or disables M8790V. Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual...
- Page 87 Enables or disables USB 2.0(EHCI) support. EHCI Controller 1/2 Enables or disables EHCI controllers 1 to 2. UHCI Controller 1/6 Enables or disables UHCI controllers 1 to 6. Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual...
-
Page 88: Boot
NumLock on wherein the function of the numeric keypad is the number keys. When set to Off, the function of the numeric keypad is the arrow keys. Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual... -
Page 89: Security
<ESC> to exit without saving the changes. Save Changes and Reset To save the changes and reset, select this field then press <Enter>. A dialog box will appear. Confirm by selecting Yes. Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual... - Page 90 To restore the BIOS to default settings, select this field then press <Enter>. To launch EFI shell from a filesystem device, select this field and press A dialog box will appear. Confirm by selecting Yes. <Enter>. Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual...
-
Page 91: Appendix A: Watchdog Timer Wdt Programming Guide
Step4: See ExitSetup procedure 2eh, al #Exit Setup Environment al, 02h ;Set WDT reset upon KBRST# (ref) al, 00h ;Here!! set 00h for second, set 08h for minute Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual... - Page 92 0F6h ;WDT Time-out register. 2eh, al al, 03h ;Here!! Set count 3. 2fh, al TimeCountWDT ENDP =============================================== ExitSetup PROC dx, 2eh al, 0AAh dx, al ExitSetup ENDP =============================================== Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual...
-
Page 93: Appendix B: Gpi/O Programming Guide
Bit5 : GPO55 Bit6 : GPO56 Bit7 : GPO57 1. Select GPIO group5 by set I/O port 800h to 5h 2. Read/Write GPIO data by I/O port 802h Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual... -
Page 94: Appendix C: Voltage Low Shut-Down Setting (Niskig120)
SW1 DIP Switch 1 DIP Switch 2 Start-Up Shut-Down 0=OFF 0=OFF Default 0=OFF 0=OFF 11.5V 10.5V Default 0=OFF 1=ON 0=OFF 1=ON 1=ON 0=OFF 1=ON 0=OFF 12.5V 1=ON 1=ON 1=ON 1=ON 12.5V 11.5V Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual... -
Page 95: Appendix D: Dc Input & Output Setting (Niskig120)
24V DC input 0=OFF 1=ON 24V Output 1=ON 0=OFF Reserved only 1=ON 0=OFF 19V Output 1=ON 1=ON 12V Output 9~36V Power module without 1=ON 1=ON Ignition function Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual... -
Page 96: Appendix E: Power On/Off Delay Timer Setting (Niskig120)
DIP Switch 2 Function Setting Note 0=OFF Disable (default 3 seconds) Default 0=OFF Disable (default 0 second) Default 1=ON Enable (DIP Switch 3,4,5) 1=ON Enable (DIP Switch 6,7,8) Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual... - Page 97 DIP Switch 6, 7, 8 POWER OFF Delay Timer Select 10sec 20sec 30sec 1min 1min 5min 5min 10min 10min 30min 15min 1hour 30min 6hour 1hour 18hour Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual...
-
Page 98: Appendix F: Mcu Programming (Niskig120)
4 1 3 J2 : System port J1 : MCU programming port (RS232 signal) Power ON Button (Output) COM TX (Output) SLP_S3 IN (Input) COM RX (Input) Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved NViS 2280 User Manual...
Need help?
Do you have a question about the NViS 2280 and is the answer not in the manual?
Questions and answers