Nexcom NSA 7160R User Manual page 106

Chapter 4: BIOS Setup
Socket Configuration > IIO Configuration > Socket0 / Socket1
Configuration > Port 1A ~ Port 5G
PCI-E Port
Enables or disables the PCIe port. In auto mode the BIOS will remove the
EXP port if there is no device or errors on that device and the device is not
HP capable. Disable is used to disable the port and hide its CFG space.
PCI-E Port Link Disable
Enables or disables link training of the PCIe port.
Link Speed
Configures the link speed of the PCIe port.
Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved.
Override Max Link Width
Configures the link speed to override the max link width set by bifurcation.
PCI-E Port DeEmphasis
Configures the de-emphasis control for the PCIe port.
PCI-E Port Clocking
Configures the PCI-E Port Clocking.
Data Link Feature Exchange
Enables or disables the Data Link Feature Exchange.
PCI-E Port MPSS
Configures the PCI-E Port MPSS.
PCI-E Port D-state
Configures the PCI-E Port D-state.
PCI-E Completion Timeout
Configures the PCI-E Completion Timeout setting.
PCI-E ASPM Support
Enables or disables the PCI-E ASPM Support.
MSI
Enables or disables the MSI.
PCI-E Extended Sync
Configures the PCI-E Extended Sync.
PCI-E 10-bit Tag Support
Configures the PCI-E 10-bit Tag Support.
91
NSA 7160R User Manual