Table of Contents
Advertisement
2.4. Loading Paper
• Printer appearance may differ because of various models and functions, so the schematic
Note:
diagram is only for your reference.
2.4.1. Load in the standard feed tray
:To avoid the risk of electrical shock, if you are accessing the controller board or memory
devices after setting up the printer, turn the printer off, and unplug the power cord from the electrical
outlet before continuing. If you have any other devices attached to the printer, turn them off as well,
and unplug any cables going into the printer.
:To reduce the risk of equipment instability, load each tray separately. Keep all other trays
closed until needed.
1. Remove the standard feed tray from the printer completely.
• To avoid paper jams, do not remove the tray while the printer is busy.
Note:
15
Advertisement
Table of Contents
Troubleshooting
