Loading Paper; Loading Into Standard Input Tray - Pantum P3502DN User Manual

Please observe the following standards:
Types of Print
Correct Practices
Media
Use labels with no exposed lining
paper only.
Labels shall be put flat when
using.
Label
Use labels of full sheet only.
There is no guarantee that all the
labels in the market can meet
corresponding requirements.
Envelopes should be loaded
Envelope
evenly.
Use only transparencies approved
Transparency
for use in laser printers.
Use only heavy paper that
Thick paper,
is approved for use in laser
carton paper printers and meets the weight
specifications of this printer.

2.2. Loading Paper

2.2.1. Loading into Standard Input Tray

1. Completely draw out the standard input tray from the printer.
2. Slide the paper-length guide and paper-width guide of the standard input tray to the desired
paper size slot, so as to match with the length and width of the paper.
Note: • Do not overly squeeze the "paper-length guide" and "paper-width guide",
otherwise it will easily lead to deformation of paper.
Incorrect Practices
Use wrinkled, blistering or damaged
labels.
Use wrinkled, nicked, stuck or damaged
envelopes.
Use envelopes with clips, snaps,
Windows, or coated linings.
Use envelopes with self-adhesive
stickers or other synthetic materials.
Use transparent print media that is not
suitable for laser printers.
Use the paper whose weight is more
than the specification of the media
recommended for this printer, unless the
paper is approved for use in this printer.
2-4