Product View - Pantum CP2100 Series User Manual

1.3. Product View

Side view
1 Control Panel
2 Standard exit
3 Multipurpose feed tray For placing media to be printed in multi-purpose tray.
4 Standard feed tray
• Printer appearance may vary depending on the printer model and configuration; the
Note:
schematic diagram is for reference only.
Rear View
: To avoid the risk of electrical shock, do not set up this product or make any electrical or
cabling connections during a lightning storm.
: To avoid the risk of fire or electrical shock, connect the power cord to an appropriately rated
and properly grounded electrical outlet that is near the product and easily accessible.
:Do not cut, twist, bind, crush, or place heavy objects on the power cord. Do not subject the
power cord to abrasion or stress. Do not pinch the power cord between objects such as furniture
and walls. If any of these things happen, it could result in a risk of fire or electrical shock. Inspect the
power cord regularly for signs of such problems. Remove the power cord from the electrical outlet
before inspecting it.
:To avoid the risk of electrical shock, make sure that all external connections (such as Ethernet)
are properly installed in their marked plug-in ports.
:To avoid the risk of fire or electrical shock, use only the power cord provided with this product
or the manufacturer's authorized replacement.
Indicate printer status to conduct set operation.
For storing the printed paper.
For placing the media for printing from the standard feed tray.
3