Pantum CP2100 Series User Manual page 130

• Toner cartridge is not installed
properly.
Uneven print
density
• The paper used has been
stored in the air for a prolonged
time.
• Toner cartridge is not installed
properly.
Horizontal dark
lines
• The paper used has been
stored in the air for a prolonged
time.
• Toner cartridge is not installed
properly.
Vertical dark lines
• Toner cartridge is not installed
properly.
Horizontal white
lines
• The print media does not meet
the usage specification. For
example, the print media is
textured, damp, or too rough.
• Toner cartridge is not installed
properly.
Vertical white lines
• Pull out the toner cartridge tray, remove the
toner cartridge, then insert the toner cartridge,
and insert the toner cartridge tray.
• Perform the "Fully Calibrated" setting,
please refer to Section 9.2.2
mode.
• Keep the paper in its original wrapper before
use.
• Pull out the toner cartridge tray, remove the
toner cartridge, then insert the toner cartridge,
and insert the toner cartridge tray.
• Keep the paper in its original wrapper before
use.
• Pull out the toner cartridge tray, remove the
toner cartridge, then insert the toner cartridge,
and insert the toner cartridge tray.
• Pull out the toner cartridge tray, remove the
toner cartridge, then insert the toner cartridge,
and insert the toner cartridge tray.
• For proper use of media within the
specification range, please refer to
• Pull out the toner cartridge tray, remove the
toner cartridge, then insert the toner cartridge,
and insert the toner cartridge tray.
for the setting
Section 2 .
116