Table of Contents
Advertisement
To set the OSD menu timeout
1.
Bring up the OSD main menu.
2.
Navigate to the OSD Settings menu.
3.
Enter the OSD Timeout submenu.
4.
Select Enabled/Disabled as desired and confirm.
4.5 Power lock function
About power lock function
When the power lock function is enabled, it is no longer possible to switch off your display via the jog dial as
described in
"On/Off switching", page
To enable/disable the power lock function
1.
Bring up the OSD main menu.
2.
Navigate to the Power Management menu.
3.
Enter Power Lock submenu.
4.
Select Enabled/Disabled as desired and confirm.
4.6 DPMS mode
About DPMS mode
Enabling the Display Power Management System (DPMS) mode on your display will optimize its diagnostic
lifetime by automatically switching off the backlight when the display is not used for a specified period of time.
By default, DPMS mode is enabled on your display, but it also needs to be activated on your workstation. To
do this, go to the "Power options" of your workstation.
Barco recommends setting DPMS on your workstation to activate after 30 minutes of non-usage.
When DPMS mode is enabled, three additional functions become available: hibernate, presence
sensor and dry mode. See
for more information.
When DPMS mode with USB charging is enabled (see
enabled (see
"Hibernate", page
mouse/keyboard connected to the display.
When DPMS mode without USB charging is enabled (see
is enabled (see
"Hibernate", page
the jog dial, or with a mouse/keyboard connected to the workstation (and not to the display).
To enable/disable DPMS mode on your display
1.
Bring up the OSD main menu.
2.
Navigate to the Power Management menu.
3.
Enter the DPMS Mode submenu.
4.
Select Disabled, USB Charging Enabled or USB Charging Disabled as desired and confirm.
23. DPMS mode is not affected by this setting.
"Hibernate", page
28,
"Presence sensor", page
28), you can easily awaken your system from hibernate with a
28), you can only awaken your system from hibernate by pressing
Advanced operation
28,
"Dry mode", page 29
"DPMS mode", page
27) and hibernate is
"DPMS mode", page
R5915130 /05
Nio 2MP / 3MP LED Display
27) and hibernate
27
Advertisement
Table of Contents
