Table of Contents
Advertisement
Installation and setup
DP IN 1
DP IN 2
Image 2–5
Power on the display system
1.
Press/Turn the jog dial to activate your display.
2.
Switch on the workstations connected to your display.
Your display will be running in a basic video mode at a default refresh rate when first time starting up.
Install the MXRT driver and Intuitive Workflow Tools
When using a Barco MXRT display controller, install the MXRT driver and Intuitive Workflow Tools on the
connected workstation. Barco's Intuitive Workflow Tools are designed to increase visibility of subtle details,
improve focus during reading sessions, and accelerate workflow.
1.
Download the latest MXRT driver and Intuitive Workflow Tools from
2.
Install the MXRT driver and Intuitive Workflow Tools as described in the Barco "Display Controller and
Intuitive Workflow Tools" user guide on the included documentation CD, or at www.barco.com/support.
Enable the KVM switch
1.
Bring up the OSD main menu.
2.
Navigate to the Image Settings menu.
3.
Enter the KVM Switch submenu.
4.
Select Enabled and confirm.
When enabling the KVM switch, the Image Source menu will be inaccessible.
To switch KVM inputs
1.
Press or turn the jog dial to activate the shortcut bar. The KVM switch icon (
default because the KVM switch is enabled.
2.
Press the jog dial again to switch KVM inputs.
16
R5915130 /05
Nio 2MP / 3MP LED Display
KVM 2
KVM 1
USB
SERVICE
DP OUT
DOWN
WORK-
STATION 2
WORK-
STATION 1
USB
USB
UP 1
UP 2
DC IN
www.barco.com/mxrt.
) is now selected by
Advertisement
Table of Contents
