Osd Menu Language; Osd Menu Orientation; Osd Menu Automatic Close Function; Power Lock Function - Barco MDCC-4430 User Manual

Advanced operation

4.1 OSD menu language

About the OSD menu language
By default, the OSD menu comes up in English. However, there's a wide range of other languages available
for the OSD menu of your Coronis Fusion 4MP / 6MP.
To change the language of the OSD menu:
1. Bring up the OSD main menu.
2. Navigate to the Configuration > User Interface > Menu menu.
3. Enter the Language submenu.
4. Select one of the available languages and confirm.

4.2 OSD menu orientation

About orientation
The orientation of the OSD menu can be set to landscape, portrait or inverse portrait. This is useful when
physically mounting your display in another orientation.
To adjust the orientation
1. Bring up the OSD main menu.
2. Navigate to the Configuration > User Interface > Menu menu.
3. Enter the Orientation submenu.
4. Select Landscape, Portrait or Inverse Portrait and confirm.

4.3 OSD menu automatic close function

About the OSD menu automatic close function
By default, the OSD menu will disappear automatically after approximately 90 seconds of inactivity. However,
this function can be disabled so that the OSD menu remains on the screen until manually closed.
To enable/disable the OSD menu automatic close function:
1. Bring up the OSD main menu.
2. Navigate to the Configuration > User Interface > Menu menu.
3. Enter the Automatic Close submenu.
4. Select Enabled/Disabled as desired and confirm.

4.4 Power lock function

About the power lock function
When the power lock function is enabled, it is no longer possible to switch off your display via the jog dial as
described in "Standby switching", page
To enable/disable the power lock function:
1. Bring up the OSD main menu.
22 R5911227 /05 Coronis Fusion 4MP / 6MP
19. DPMS mode is not affected by this setting.