Related Manuals for Barco Nio 3MP LED
Summary of Contents for Barco Nio 3MP LED
- Page 1 Nio 3MP LED Display User Guide MDNG-3421 (option CN NC) MDNG-3421 (option CN) MDNC-3421 (option CN NC) MDNC-3421 (option CN) ENABLING BRIGHT OUTCOMES...
- Page 2 Registered address: Barco NV President Kennedypark 35, 8500 Kortrijk, Belgium www.barco.com/en/support www.barco.com Barco NV Beneluxpark 21, 8500 Kortrijk, Belgium www.barco.com/en/support www.barco.com...
-
Page 3: Table Of Contents
4.14.1 About Embedded QA..............................27 4.14.2 DICOM status report ..............................27 4.14.3 DICOM compliance check ............................28 4.14.4 DICOM calibration .................................28 4.14.5 Reset DICOM calibration............................28 4.14.6 DICOM error threshold ...............................29 4.15 Display orientation....................................29 4.16 Video input signals ...................................29 4.17 EDID timings......................................30 K5902157-01 Nio 3MP LED Display... - Page 4 5 Repacking your display.....................................33 Repackaging instructions................................34 6 Cleaning your display ....................................37 Cleaning instructions ..................................38 7 Important information....................................39 Safety information.....................................40 Environmental information................................41 Regulatory compliance information ............................42 Explanation of symbols..................................43 Legal disclaimer....................................45 Technical specifications.................................46 Open source license information .............................49 K5902157-01 Nio 3MP LED Display...
-
Page 5: Welcome
Welcome! K5902157-01 Nio 3MP LED Display... -
Page 6: What's In The Box
• External power supply If you ordered a Barco display controller, it's also in the box together with its accessories. A dedicated user guide is available on the system disc. Keep your original packaging. It is designed for this display and is the ideal protection during transport and storage. - Page 7 If insufficient USB resources are available on the PC, the USB cable may be left unattached and the display will communicate essential QC information using DDC on the video cable, albeit more slowly; USB peripherals will also be ignored. K5902157-01 Nio 3MP LED Display...
- Page 8 Welcome! K5902157-01 Nio 3MP LED Display...
-
Page 9: Installation
Installation Prior to installing your Nio 3MP LED Display and connecting all necessary cables, make sure to have a suitable display controller physically installed in your computer. If you are using a Barco display controller, please consult the user guide delivered with it to do this. -
Page 10: Display Position Adjustment
Image 2-2 WARNING: The display must be in its highest position before it can be properly pivoted. Store the foot lock clip in the storage hole in case the display needs to be transported later. K5902157-01 Nio 3MP LED Display... -
Page 11: Cable Connections
Connect the workstation's USB host to the USB upstream connector on the display if you want to make use of QAWeb or any of the display USB downstream connectors (e.g. to connect a keyboard, mouse, touch pad or other peripheral). K5902157-01 Nio 3MP LED Display... - Page 12 Image 2-8 Close the connector compartment cover. You will hear a “click” sound when the cover is in position. K5902157-01 Nio 3MP LED Display...
-
Page 13: Vesa-Mount Installation
Put the display in the lowest position and lock the height mechanism. Image 2-10 Put the display face down on a clean and soft surface. Be careful not to damage the panel screen. Remove the plastic cover with a flathead screw driver. K5902157-01 Nio 3MP LED Display... -
Page 14: First Time Starting Up
2.4 First time starting up Overview You are now ready to start up your Nio 3MP LED Display for the first time. Switch on your Nio 3MP LED Display as described in “Standby switching”, page 19. Turn on the computer connected to your display. - Page 15 Your Nio 3MP LED Display will be running in a basic video mode at a default refresh rate when first time starting up. If you are using a Barco display controller, please consult the user guide delivered with it to install the drivers, software and documentation.
- Page 16 Installation K5902157-01 Nio 3MP LED Display...
-
Page 17: Daily Operation
Daily operation K5902157-01 Nio 3MP LED Display... -
Page 18: Recommendations For Daily Operation
LCD displays use technology based on pixels. As a normal tolerance in the manufacturing of the LCD, a limited number of these pixels may remain either dark or permanently lit, without affecting the diagnostic performance of the product. To ensure optimal product quality, Barco applies strict selection criteria for its LCD panels. -
Page 19: Standby Switching
How to bring up the OSD menus The OSD menu allows you to configure different settings to make your Nio 3MP LED Display fit your needs within your working environment. Also, you can retrieve general information about your display and its current configuration settings through the OSD menu. - Page 20 Exit all OSD menus at once by touching the standby key for approximately 2 seconds. The key icons are displayed above the keys, adapted to the function that it is used for (menu dependent). Overview key icons Left, Right Menu Enter Cancel Standby (IEC 60417–5009) K5902157-01 Nio 3MP LED Display...
-
Page 21: Advanced Operation
Advanced operation K5902157-01 Nio 3MP LED Display... -
Page 22: Osd Menu Language
About the OSD menu language By default, the OSD menu comes up in Simplified Chinese. However, also English is available for the OSD menu of your Nio 3MP LED Display. To change the language of the OSD menu: Bring up the OSD main menu. -
Page 23: Key Indicator Lights
About the power lock function By enabling the power lock function, the Nio 3MP LED Display is forced to remain switched on. This means that it can’t be switched to stand-by mode manually until the power lock function is disabled again. -
Page 24: Hibernate
4.8 Luminance target About the luminance target The luminance target of your Nio 3MP LED Display is adjustable over a predefined range. When you change the luminance target, the display will adjust its backlight to reach the target. To set the luminance target: Bring up the OSD main menu. -
Page 25: Display Functions
To quickly switch the viewing mode without having to enter the OSD menu, touch the left and right key at the same time during normal operation. The diagnostic mode should always be selected when the Nio 3MP LED Display is intended to be used in a diagnostic environment. -
Page 26: Ambient Light Compensation (Alc)
DICOM display function when Ambient Light Compensation (ALC) is enabled. Please refer to “Ambient Light Compensation (ALC)”, page 26 to enable ALC. The available reading rooms for your Nio 3MP LED Display are: • CR/DR/ MAMMO: Corresponds to light conditions in diagnostic reading rooms for computed radiology, digital radiology or mammography. -
Page 27: Embedded Qa
Embedded QA is not a replacement for the Barco MediCal QAWeb solution. Although Embedded QA is a reliable option to perform a simple calibration or compliance test, Barco still highly recommends MediCal QAWeb as the solution of choice for calibration and QA. Medical QAWeb brings... -
Page 28: Dicom Compliance Check
It is possible to restore the original (not corrected) DICOM curve. To reset the DICOM calibration: Bring up the OSD main menu. Navigate to the Configuration > Calibration > Embedded QA menu. Enter the DICOM preferences submenu. K5902157-01 Nio 3MP LED Display... -
Page 29: Dicom Error Threshold
To manually select a video input signal: Bring up the OSD main menu. Navigate to the Configuration > Image Source menu. Enter the Image Source submenu. Select one of the available input signals and confirm. K5902157-01 Nio 3MP LED Display... -
Page 30: Edid Timings
4.18 EDID format About EDID format Your Nio 3MP LED Display describes its capabilities to the display controller by means of display identification data. This data contains timings, display size, pixel mapping info, etc. and is needed to make sure that the video source can be correctly displayed. -
Page 31: Display Status
(display function, luminance, ALC, etc.) and the status about activated connections. To retrieve the status of your display: Bring up the OSD main menu. Navigate to the Status menu. Enter the Display, Image Sources or Calibration submenu as desired. K5902157-01 Nio 3MP LED Display... - Page 32 Advanced operation K5902157-01 Nio 3MP LED Display...
-
Page 33: Repacking Your Display
Repacking your display K5902157-01 Nio 3MP LED Display... -
Page 34: Repackaging Instructions
Repacking your display 5.1 Repackaging instructions Overview of the packaging Image 5-1 Video and power cables Display controller box System CD('s) and user guide Power supply Top buffer Display Bottom buffer K5902157-01 Nio 3MP LED Display... - Page 35 When applicable, put the display controller box in the dedicated cavity of the top buffer. Put the system CD('s) and user guide in their original bag and place it in the dedicated cavity of the top buffer. Close and seal the box. K5902157-01 Nio 3MP LED Display...
- Page 36 Repacking your display K5902157-01 Nio 3MP LED Display...
-
Page 37: Cleaning Your Display
Cleaning your display K5902157-01 Nio 3MP LED Display... -
Page 38: Cleaning Instructions
LCD. CAUTION: Do not apply or spray liquid directly to the display as excess liquid may cause damage to internal electronics. Instead, apply the liquid to a cleaning cloth. K5902157-01 Nio 3MP LED Display... -
Page 39: Important Information
Important information K5902157-01 Nio 3MP LED Display... -
Page 40: Safety Information
• The installer shall assess the magnetic environment before installation or use of the device. Power cords: • Do not overload wall outlets and extension cords as this may result in fire or electric shock. K5902157-01 Nio 3MP LED Display... -
Page 41: Environmental Information
Electronic Products ” (Also called RoHS of Chinese Mainland), the table below lists the names and contents of toxic and/or hazardous substances that Barco’s product may contain. The RoHS of Chinese Mainland is included in the MCV standard of the Ministry of Information Industry of China, in the section “Limit Requirements of toxic substances in Electronic Information Products”. -
Page 42: Regulatory Compliance Information
7.3 Regulatory compliance information Indications for use The Nio 3MP LED Display is intended to be used as a tool in displaying and viewing digital images (excluding digital mammography) for review and analysis by trained medical practitioners. Caution (USA): Federal law restricts this device to sale by or on the order of a physician. -
Page 43: Explanation Of Symbols
The manufacturing country of the product is indicated on the product label (“Made in …”). Importers contact information To find your local importer, contact one of Barco’s regional offices via the contact information provided on our website (www.barco.com). 7.4 Explanation of symbols... - Page 44 Equipotentiality Protective earth (ground) Symbols on the box On the box of the device, you may find the following symbols (nonrestrictive list): Values for xx and yy can be found in the technical specifications paragraph. K5902157-01 Nio 3MP LED Display...
-
Page 45: Legal Disclaimer
Barco software products are the property of Barco. They are distributed under copyright by Barco NV or Barco Inc., for use only under the specific terms of a software license agreement between Barco NV or Barco Inc. and the licensee. No other use, duplication, or disclosure of a Barco software product, in any form, is authorized. -
Page 46: Technical Specifications
Power consumption 50 W (nominal) < 0.5 W (hibernate) < 0.5 W (standby) Dimensions with stand (W x Portrait: 378 x 528~628 x 235 mm H x D) Landscape: 491 x 472~572 x 235 mm K5902157-01 Nio 3MP LED Display... - Page 47 -20 °C to 60 °C Operating humidity 8% to 80% (non-condensing) Storage humidity 5% to 85% (non-condensing) Operating pressure 70 kPa minimum Storage pressure 50 to 106 kPa MDNG-3421 Screen technology Active screen size 540 mm (21.3") (diagonal) K5902157-01 Nio 3MP LED Display...
- Page 48 Landscape: 491 x 378 x 84 mm Dimensions packaged (W x 500 x 280 x 670 mm H x D) Net weight with stand MDNG-3421 (option CN): 11.3 kg MDNG-3421 (option CN NC): 10.0 kg K5902157-01 Nio 3MP LED Display...
-
Page 49: Open Source License Information
A list of the Open Source Software components used is available in the applicable EULA, through the “My Barco” section of the Barco website or through other (online) means. Copyright on each Open Source Software component belongs to the respective initial copyright holder, each additional contributor and/or their respective assignee(s), as may be identified in the respective Open Source Software documentation, source code, README file, or otherwise. - Page 50 Barco whatsoever. You further acknowledge that any such additions, changes or modifications may impair the ability of Barco – at Barco’s sole discretion - to continue to provide service, warranties, software updates, fixes, maintenance, access or such similar abilities, without any recourse or claim towards Barco whatsoever.
- Page 51 Important information K5902157-01 Nio 3MP LED Display...
- Page 52 K5902157-01 | 14/08/2018 Barco NV | Beneluxpark 21, 8500 Kortrijk, Belgium Registered address: Barco NV | President Kennedypark 35, 8500 Kortrijk, Belgium www.barco.com...